User's Manual

70-3350/5445 – User’s Manual
10.1.d Changing the channel scanning list
You can use this function to create a personalized scanning list and to set a priority channel that is different from the
pre-programmed one.
1) Ensure that scanning is not activated.
2) Press the menu/↵ button to access the command menu, then use the
buttons to highlight the Scan option.
3) Press menu/↵ to view the available sub-menus.
4) Press the
buttons until the Edit List sub-menu is highlighted. The first channel added to the scanning list will
appear. Above the four function buttons, the following should also appear on the display:
padd chadd chdel esc
F1 F2 F3 F4/ESC
5) Depending on what you would like to do, press the corresponding function button.
F2 Adding new channels to the list
1) Press the F2 (
chadd) function key. You will see the first channel that is not inserted in the scanning list.
2) Press the
buttons until the channel you desire appears on the screen.
3) Press the menu/↵ button to memorize the channel in the scanning list.
4) Exit the sub-menu by pressing the F4/E
SC button, then press it a second time to exit the main menu and return to the standby
screen.
F3 Deleting channels from the list
1) Press the
buttons repeatedly until the channel you wish to delete from the scanning list has been selected.
2) Press the F3 (
chdel) function key to remove the channel from the scanning list.
3) Exit the sub-menu by pressing the F4/E
SC button, then press it a second time to exit the main menu and return to the standby
screen.
F1 Changing the priority channel
1) Remove the current priority channel from the scanning list, following the procedure outlined above.
2) Remove the new channel that you wish to assign as the priority channel from the scanning list.
3) Press the F1 (
padd) function key. You will see the first channel that is not inserted into the scanning list.
4) Press the
buttons until the channel you desire as priority appears on the screen.
5) Press the menu/↵ button twice to memorize the new priority channel and exit the scanning list.
6) If necessary, reinsert the old priority channel in the scanning list, following the procedure outlined above.
7) Exit the sub-menu by pressing the F4/E
SC button, then press it a second time to exit the main menu and return to the standby
screen.
10.2 Rapid recall of home channel
This function allows you to quickly recall the channel most frequently used (home channel).
1) Press the menu/↵ button to access the command menu, then use the buttons to highlight the Home Chan option.
2) Press menu/↵ again to confirm the channel.
will appear on the display.
10.3 Locking microphone’s keypad
If you use the MK06/35-K keypad microphone, you can lock its keypad in order to avoid sending accidental
commands during use.
1) Press the menu/↵ button to access the command menu, then use the keys to highlight the Lcd&Keypad option.
2) Press menu/↵ again to view the available sub-menus.
3) Press the
buttons repeatedly until the Keypad Lock sub-menu is highlighted.
4) Press menu/↵ to insert an
. The device’s keypad will be deactivated.
5) Exit the sub-menu by pressing the F4/E
SC button, then press it a second time to exit the main menu and return to the standby
screen. The
icon will appear on the display.
Rev. 0.1 on 27 December 2004 Page 25 of 32