User's Manual

HM35 Series – User’s Manual
Rev. 2.0 on 1 March 2004 Page 16 of 32
7 USE OF COMMANDS/OPTIONS
7.1 How to navigate the command menu
Refer to the following diagram.
1) Pressing the menu/
↵
button once opens the command menu and displays the five main menus:

Radio Param
– settings/activation of primary radio parameters

Calls
– emission of selective calls

Scan
– performs scanning functions

Home Chan
– recall of home channel (your most frequently used channel)

LCD&Keypad
– settings for display and keypad

Switches
– activates switching for various options
2) Press the
buttons to scroll through main menus and highlight the desired menu.
3) Press the menu/↵ button to access the menu and view the available sub-menus.
4) Press
again to scroll through the sub-menus and highlight the desired one:

If you have selected an adjustment (e.g. squelch level), press the
menu/
↵ button to access the sub-menu and use the
to make changes.

If you have selected an option with two values (e.g. high or low output power), you can switch from one value to another by
pressing the menu/↵ button.

If you have selected an option (activate or deactivate), a
will appear on the display when the option is activated.
Insert/remove the
symbol by pressing the menu/↵ button.

If you have selected a selective call, begin transmission by pressing the
menu/
↵ button.
5) If necessary, confirm the change once more with the menu/↵ button (e.g. in the case of variable selective calls)
6) Exit the sub-menu by pressing the
F4/E
SC
button, then press it a second time to exit the main menu and return to the standby
screen.
 You can exit the menu/sub-menu at any time, without changing settings, by pressing the F4/ESC button.

The main menu
Home Chan
has a sole purpose of recalling the priority channel; therefore, it does not have a sub-menu.
menu/↵ to access the command menu
menu/↵ to access the highlighted menu
Change value of
parameter (e.g. Hi or Lo)
Access change functions
menu/ ↵
Send selective call
insert/remove
(activate/deactivate)
to highight the main menu
to highlight the sub-menu
to make changes