User's Manual

Model BR100/200 Series
midlandusa.com Page 7
INSTALLING THE BATTERY
Your radio operates with a Lithium-Ion battery. The belt clip should be
removed (see below) to make the installation and removal of the battery
easier.
To install the battery:
With the back of the radio facing you, install the battery by sliding the
pack along the back of the radio until the latch on the radio locks.
To remove the battery:
Press the release latch and slide the pack away from the radio.
INSTALLING THE BELT CLIP
With the back of the radio facing you,
align the BELT CLIP with the screw
holes on the radio. Attach the BELT
CLIP with the Phillips-Head screws
provided in the giftbox.
*Be careful not to over tighten screws
to avoid damaging radio chassis*.