User Manual

ManualsBrandsMidland Radio ManualsTwo-Way RadioML3215

Table Of Contents

If you choose the IDCS tone code setting, you will need to use the up or down buttons to select the desired tone code of 105

available. If you choose IDCS code 023, your display will read:

If you choose IDCS code 754, your display will read:

When the desired IDCS tone code appears on the display, select and set your choice by pressing the MODE button or the P-

T-T. The radio will save your selection and return to standby mode.

IDCS Tone Signaling Frequency Table

IDCS

Code

IDCS

Code

IDCS

Code

IDCS

Code

IDCS

Code

IDCS

Code

IDCS

Code

IDCS

Code

IDCS

Code

IDCS

Code

IDCS

Code

754 654 526 454 371 315 252 205 134 072 031

743 632 523 452 365 311 251 174 132 071 026

734 631 516 446 364 306 246 172 131 065 025

732 627 506 445 356 274 245 165 125 054 023

731 624 503 432 351 271 244 162 122 053

723 612 466 431 346 266 243 156 116 051

712 606 465 423 343 265 226 155 115 047

703 565 464 413 332 263 225 152 114 043

664 546 462 412 331 261 223 145 074 036

662 532 455 411 325 255 212 143 073 032

To set the per-channel radio transmit output power, press and release the MODE button, then the up or down buttons until

appears. Press the MODE button to select. Scroll through the sub-menu settings with the up or down buttons, press the

MODE button when

appears. Settings include:

You can toggle between these per-channel settings with the up or down buttons. When the desired setting appears on screen,

press the MODE button to select. The radio will save your selection, and return to standby mode. The display

will show an “H” or an “L” to confirm High (45 Watt) or Low (2 Watt) output power setting for the current channel.

To set the normal scan list on/off setting, press and release the MODE button then the up or down buttons until the

display appears. Press and release the MODE button again to select. Scroll through the sub-menu settings with the up

or down buttons, press the MODE button when

appears on screen.

appears. Settings include:

You can toggle between these settings with the up or down buttons. When the desired setting appears on screen, press

the MODE button to select. The radio will save your On or Off selection for the current channel, and return to standby mode.

NOTE: Your radio will only scan channels with the scan setting “On”.

To set the Priority scan list on/off setting, press and release the MODE button then the up or down buttons until the