User Manual

Table Of Contents

System Option Settings Menu

To enter the System Option Setting Menu, press and release the MODE button during the receive or standby mode, then use

the up or down buttons until appears. Select the above option with a press and release of the MODE button.

(Beep Set, VOX (Voice Operated TX) Set, Time-Out-Timer Set, Penalty, Busy Channel Lockout Set, Marked Idle, Scan Set,

Priority Scan, Transmit Delay, Power Save, Clear-To-Talk, Roger Beep, 2 tone alarm, Microphone Hook and Audio

Compander). Details on sub-menu settings follow.

You can toggle between these settings with the up or down buttons. When the desired setting appears on screen, press the

MODE button to select. If you choose the Beep Set setting, you will need to use the up or down buttons to choose

or . When the desired setting appears on screen, press the MODE button to select. The radio will

save your On or Off selection and return to standby mode.

If you choose the VOX Set setting, you will also need to choose between On or Off selections, by using the up or down

buttons to choose, and the MODE button to select. If you choose On, you will need to choose a VOX level setting, which

includes:

, or . You can toggle between these VOX sensitivity level settings with the

up or down buttons. When the desired setting appears on screen, press the MODE button. The radio will save your selection

and return to standby mode.

If you choose the Time-Out-Timer setting, your choices include: or . Toggle between

the settings with the up or down buttons. When the desired setting appears on screen, press the MODE button. If you choose

“On”, you will need to choose the duration of the Time-Out-Timer setting, from 10 seconds to 990 seconds. Use the up or

down buttons to toggle, until the desired number of seconds appears on the display. Use the MODE button to select. The radio

will save your selection and return to standby mode. Example of display:

NOTE: In the Time-Out-Timer sub-menu, if “Off” is selected by pressing the MODE button, the TOT function will be disabled,

and the radio will return to standby mode.

If you choose the Time-Out-Timer Penalty setting, your choices include Penalty On or Off. Toggle between the settings with

the up or down buttons. When the desired setting appears on screen, press the MODE button. If you choose “On”, you will

need to choose the duration of the Penalty setting, from 1 second to 100 seconds. Use the up or down buttons to toggle, then

the MODE button to select the desired amount of time. The radio will save your selection and return to standby mode.

Example of display:

NOTE: In the Time-Out-Timer Penalty sub-menu, if “Off” is selected by pressing the MODE button, the TOT Penalty function

will be disabled, and the radio will return to standby mode.

NOTE: If the radio transmits in excess of the set time, it will beep an error tone and the radio will receive a signal, but will NOT

transmit during the penalty time.

Tx Output Power High/Low

Normal Scan List

Priorit

Scan List

2-Tone Option

Power High/Low

Normal Scan On/Off

Priority Scan On/Off

Individual Tone

Grou

Tone

er Grou

Tone

On/Off