User Manual

B. Press the SND key to send the dialed number.
C. When the called party answers, press the P-T-T of the microphone to answer. Release the P-T-T to listen for a response.
D. When the conversation has ended Press and hold the P-T-T of the microphone press and hold the # key for 1 or 2
seconds to end the call. Release the P-T-T when the call has ended.
Manual Dial Operation
A. Press and hold the P-T-T of the microphone and enter the desired number by pressing and releasing 0 –9, * or # keys.
The dialed numbers will appear in your radio display. # will be indicated as F in your display. Note: The # key is normally
used to end, or hang up, an interconnect system. Consult your Dealer for exact system operation. The * key will be
indicated as E.
B. When dialing is complete release the P-T-T and wait for the called party to answer.
C. When the called party answers, press the P-T-T of the microphone to answer. Release the P-T-T to listen for a response.
D. When the conversation has ended Press and hold the P-T-T of the microphone press and hold the # key for 1 or 2
seconds to end the call. Release the P-T-T when the call has ended.
To Store a Number in Memory
A. Dial the desired number. Entered number will show in the radio display.
B. Press and release the STR key.
C. Press and release any number 0 – 9, * and # to store the number.
To Recall a Stored number from Memory
A. Press and release the RCL key.
B. Press and release the number key from which a number has been stored.
C. Press SND to dial the recalled number.
If a number has been accidentally recalled repeat steps A. and B. until the proper number has been recalled.
Clearing a Stored Number
A. Press and release the RCL key.
B. Press and release the number key from which a number has been stored. The stored number will show in the radio
display.
C. Press and hold the CLR key to remove the stored number. A new number can now be entered and stored in that location.
Clearing a Dialed Number
When a number has been accidentally entered during auto dial a press and release of the CLR key will delete an individual
number. A press and hold of the CLR key will clear the entire dialed number.
Licensing and Service Information
FCC Licensing
The Federal Communications Commission requires the operator of this radio be properly licensed under the applicable Part
and/or Parts of the FCC Rules and Regulations.
Consult your radio communications Dealer or contact the nearest FCC field office for information about obtaining a license.
Service
Do not tamper with internal adjustments. Damage to the equipment and/or improper operation may result. There
are no serviceable components inside the radio.
It is recommended that you return your radio to a qualified radio communications Dealer for any service or repairs.
Maintenance
Your Legacy radio is designed to be maintenance free. To keep it in good working condition: