User's Manual

®
Page 10 www.midlandradio.com
CHANNEL SELECTION (GMRS/FRS BAND)
Press the MENU button once, and then the buttons to select one
of the 28 GMRS/FRS channels. To confirm the selection, press the
PTT button or press the MENU button again to move to the next
feature setting.
SET
TING PRIVACY CODES
Your LXT460 Series has 121 Privacy Codes available. The selected
Privacy Code may be different for each channel. To select a Privacy
Code for the current channel press the MENU button twice, and then
the buttons to select one of the 38 CTCSS Privacy Code. Press
again the MENU button and the button to select one of the 83
DCS Privacy Code. The Privacy Code icon on the display will indicate
whether you set your Privacy Code in CTCSS or DCS mode. To
confirm the selection, press the PTT button or press MENU button
again to move to the next feature setting.
Note : If you select any CTCSS Privacy Code, any pre-selected
DCS Privacy Code will be cancelled and vice-versa.
Selecting a Privacy Code of "oF" will disable the Privacy feature.
To communicate between two LXT460 Series radios, all radios in
your group must be set to the same channel and Privacy Code
selections.
TRANSMIT (TX) POWER LEVEL SELECTION
Your LXT460 has 2 power level settings. To select the power level on
channels 1~7 and 15~22, press the MENU button until a “Pr” icon will
appear blinking on the display. Then press the buttons to select
TRANSMIT POWER LEVEL icon (H: Hi/L: Lo). To confirm, press the
PTT button or press MENU button again to move to the next feature
setting. When the PTT button is pressed during Low Battery Level
condition, the TX Power will automatically switch from Hi(H) to
Lo(L) level.
Note : You cannot adjust the power setting on the FRS
channels (8~14). They are set to Low power per FCC
regulations.
/
Model LXT460 Series
/
!
/
!
/