Operation Manual

ENGLISH

7. "SCAN (DS)" button: With this control, you can automatically seek for a busy channel.

Turn the Squelch clockwise until the background noise is no longer heard.

 Press the "SCAN" button: the transceiver will scan automatically all the channels.

If you switch on the unit and push “SCAN” and “AM/FM”(LCR) at the same time, you

will select the operating band, which will be visualised on the display.

DS (Digital Automatic Squelch): differently from the standard squelch, the D.S.

automatically detects the squelch level that allows a clear reception of all incoming

signals, there’s no need to make any further adjustment. This function also eliminates

the unwanted background noise in absence of incoming signals.

To select the automatic squelch:

• Turnontheradio.

• PressbrieflytheSCAN(DS)button.Asconfirmationofyourselection,thedisplay

shows AS in the top right corner, in place of the frequency band in use.

8. "Squelch" Control: For the maximum receiver sensitivity, the control must be regula-

ted exactly where the receiver background noise disappears.

9. “ON/OFF Volume” Control.In"OFF"positionyourtransceiverisOFF.Turnthiscon-

trol clockwise to switch on the unit. Turn the knob clockwise a little more to set the audio

level, until you get a comfortable reception.

10. Microphone jack: Insert the mic connector into this jack.

REAR PANEL

11. ”EXT” jack: external loudspeaker jack.(the internal loudspeaker is excluded)

12. Power 12.6V DC: power supply cable

13. S.Meter jack: it allows an external “S. Meter” connection

14. Antenna connector (SO239 connector type)

EXT S.METER

DC13,8V

ANTENNA