Owner manual

SPECIAL SETUP CONFIGURATION

3 way conversation always on While in Setup mode, press the Phone and AUX buttons for 3 sec.

Steady Blue for two seconds= activated Double long ash = deactivated

Change VOX sensitivity or disable it While in Setup mode, press short the AUX buttons (blue light on). Now, press “Volu-

me +” or “Volume -“to increase or reduce sensitivity. Press again the AUX button to

conrm the new setting and go back to the SETUP mode (Red light always on).

Blue light ashing:

Once = VOX disable

Twice = very low sensitivity

3 times = low sensitivity

4 times = medium sensitivity.

5 times = high sensitivity

Exit SETUP mode While in Setup mode, long press the Intercom button. The Red light will turn off and

the Blue light starts ashing.

European CE Notice Certication and Safety Approvals Information

This product is CE marked according to the RTTE Directive (99/5/EC) and is free use in all the EU countries.

Users are not permitted to make any changes or modications to the device.

Modications which are not expressly approved by the producer invalidate the warranty card.

For further information, please go to our website