User manual

10 | Midland M24/48/99-S User manual Midland M24/48/99-S User manual | 11
Attention
• Alkaline batteries cannot be recharged.
• Do not recharge the radio without the rechargable batteries or wi-
thout the battery pack.
• For the very first recharge of the battery pack allow not less than 8
hours (only for M48-S and M99-S models).
M24-S model
This model is provided with 8 alkaline batteries: they cannot be rechar-
ged, therefore, when they are completely discharged, they must be re-
placed with new ones.
M48-S model
This model is provided with battery packs and wall adapter. Insert the
battery packs and plug the wall adapter into the MIC/CHG jack on the
side of the transceiver. The wall adapter is a double plug type, so you
can recharge both transceivers at the same time. Only if the transceiver
is left on during the charging, the icon on the LCD display will blink
indicating that the radio is being charged. This indication will not turn off
when the batteries are fully charged.
M99-S model
This model is provided with battery packs, 2 single desktop chargers and
wall adapters. Insert the battery packs, connect the wall adapters plug
to the back of the desktop chargers and insert the transceivers into the
desktop chargers cradles. If the transceivers have been inserted correctly,
the red LED light on the desktop chargers will turn on, indicating that the
radio is charging. Only if the transceiver is left on during the charging,
the icon on the LCD display will blink indicating that the radio is being
charged. Both indications will not turn off when the batteries are fully
charged.
Automatic power save
All the models are supplied with an automatic current economy circuit.
If the transceiver receives no signal for more than 10 seconds, the “power
save function automatically activates. The battery life may increase by
up to 50 %.
To use the headset provided with M99-S model, be sure the
micro-switch is in the correct position:
PTT: for manual activation
VOX: for voice activation
Accessories
All the models are provided with the MIC/CHG jack for connection to
accessories such as mikes and headsets. This plug is a “2 pin type and is
compatible with all the Midland’s range of accessories.