User manual

UK
20 www.midlandeurope.com
6. Double click on the Middle button, the Red light will turn o and the Blue light will
start flashing. You can use now your BTX1 PRO.
How to use the Intercom
To use the intercom feature, be sure that both units are turned on and correctly paired
together.
Manual activation
Press the Middle button on one of the two units in “Intercom” mode. Communication is
enabled and remains active until you press again the middle button. The intercom need
some second to activate, you will hear a beep tone when the intercom is open.
Voice activation (VOX)
Simply say something, after some seconds the communication will be opened and will
remain active for the time you are talking. If there is no conversation the intercom will be
closed after 40 seconds. If needed you can close the intercom manually without waiting
40 seconds (just press the middle button).
If needed, you can disable the VOX feature simply by pressing the Backward button for
7 sec. A voice announcement will advise you when the VOX is disabled. To turn the VOX
on again, just press the same button and a voice announcement will advise you that the
VOX is now active. This setting is remembered also if you turn o the unit.
Adjusting the volume
Your Midland BTX1 PRO uses AGC technology, which automatically adjusts the listening
volume in relation to background noises. However, it is also possible to manually adjust
the volume by means of the “Volume +” and “Volume -“buttons.
The volume setting is indipendent for each audio source: intercom, stereo music, phone
call, FM radio.
Attention: volume can be adjusted only when an audio connection is active.
Set up of the AGC system
To adjust the sensitivity of the AGC system you can use the ”BT UPDATER” Pc Softwa-
re or the smartphone “BT SET-APP” application. You can choose dierent set up based
on your motorbike type (naked, touring, sport) or if you are riding as a passenger. You can
disable the AGC system pressing “Volume +” and “Volume -” togheter for 3 sec.
Compatibility with Midland BT line units
The BTX1 PRO is compatible with BTX2 PRO, BT Next PRO, BT Next Conference,
BTX2 FM and BTX1 FM.
When paired the max distance of the intercom is defined from the lower possible.
The BTX1 PRO is compatible with the previous line of Midland BT (BT Next, BTX2 and
BTX1) only if updated to firmware version 2014 or later.
Talk 2 All - Universal Intercom with dierent brand unit
Thanks to the “Talk2 All - Universal Intercom” feature it is now possible to pair your BTX1
PRO to a dierent brand intercom available on the market.
1. On the BTX1 PRO enter the setup mode: (With the unit OFF press and hold down the
Middle button about 7 sec., until the Red light is on permanently.
2. Press the “Forward” button for 3 seconds, the Red and Blu LED light will flash slowly.
3. On the other intercom (not Midland brand) follow the procedure to pair to a phone.
Talk2All - Universal Intercom not
Midland brand device
Attention: remember to switch OFF all the other Bluetooth device during the pairing proce-
dure, only the two devices involved in the pairing must be turned on.
If successfully paired the red/blue light will stop flashing and the blu light will slowly flash
instead.
To open/close the “Universal Intercom” communication from the BTX1 PRO press
“Forward” button (in “Intercom” mode)
On the other intercom just press the phone redial button.
Maybe it will be necessary to press the dial button two times, depending on the model of the
not Midland intercom.
Attention: when using this configuration, the other intercom (not Midland brand) will be able
to be paired to a phone only if two phones are supported.