BR02 BUSINESS RADIO Instruction guide Suitable for: Business Restaurants Hospitality Warehousing
Index Programming software (optional) 2 Content 3 Main characteristics 3 Coverage/Range 3 Main controls and parts of the radio 4 Operations 5 Power on/off and volume adjustment 5 Transmission 5 Monitor 6 Scan 6 Squelch 7 Battery recharge 7 Maintenance 8 Technical specifications 9 Troubleshooting 11 BR02 instruction guide |1
Thanks for choosing Midland! BR02 is a portable transceiver that is free use in almost all European countries. For further information, we suggest you look at the “Restrictions on the use” chart. Programming software (optional) Thanks to Midland Programming software PRG-10, it is possible to increase the performance of your radio or to reduce its functionality by disabling some of the default features (CTCSS, DCS, Squelch...) For further information, please consult the Programming software manual.
Content • • • • • 1 BR02 transceiver 1 belt clip 1 wall adaptor 1 1800mAh Li-ion rechargeable battery pack 1 desktop charger Main characteristics • • • • • • • • • • • PMR446 Transceiver 16 PMR446 channels: 8+8 pre-programmed 38 CTCSS tones/104 DCS codes Output power: ≤ 500mW ERP Channel spacing: 12.5KHz Scan Vocal tuning Battery save Monitor Squelch with 10 selectable levels Battery life up to 21 hours Li-Ion battery pack 1800mAh 3.
Main controls and parts of the radio 1 2 3 6 7 4 10 5 1. 2. 8 9 4. Antenna Encoder: rotate clockwise or counter-clockwise to select the desired channel Power/volume knob- turn clockwise to power on and increase the volume level. Turn counter-clockwise to decrease the volume level and power off. Speaker 4| BR02 instruction guide 3.
5. 6. Built-in microphone Led indicator: RED: TX; GREEN: RX. 7. PTT: push this button to transmit, release it to receive. 8. Function key 1: hold down this button to activate the Monitor function. 9. Function key 2: keep pressed for 3 seconds to activate the SCAN function. 10. External Speaker/Mic Jack- allows the connection with external devices such as headsets, microphones. Operations Power on/off and volume adjustment Rotate the Power/Volume knob clockwise to turn the radio on.
Monitor The Monitor feature is for excluding (opening) the Squelch, in order to listen to signals that are too weak to keep the Squelch permanently opened. Hold down the Function key 1 to enable such function. Scan To begin scanning, press and hold the Scan button for 3 seconds. Your radio will beep twice alerting you that the radio has entered the scan mode. 2. When in Scan Mode, the radio will rapidly scan through all programmed channels and will pause on any active channel.
Squelch The Squelch function suppresses noises on free channels and allows to receive even weak signals. BR02 has 10 different Squelch levels that can be set by programming software: 0 means that the Squelch is turned off; from level 1 to level 9 you will have different levels of noise reduction. The higher is the level, the louder will be the Squelch. By default, the Squelch level of BR02 is set on level 4.
Maintenance Your BR02 was designed to fulfill any warranty obligations and to enjoy this product for many years. As for all the electronically devices, we recommend you to follow this few suggestions: • Do not attempt to open the unit. Non-expert handling of the unit may damage it and/or annul the warranty. • High temperatures can shorten the life of electronic devices, and warp or melt certain plastics. Do not store the radio in dusty or dirty areas. • Keep the Radio dry.
Technical specifications General Frequency range Working temperature Operating voltage Operate mode Dimensions Weight Antenna impedance Duty cycle Category Transmitter Frequency stability Output power Max frequency deviation Audio distortion Adjacent channel power Spurious radiation Occupied bandwidth Receiver RF sensibility Audio distortion Audio response Adjacent channel selectivity Intermodulation rejection Spurious response Blocking 446.00625- 446.09375 MHz (PMR446) -20°/+55° C 3.
Troubleshooting Problem Possible Cause The radio doesn’t switch on The battery pack is discharged a installed correctly. The radio switches off shortly after it has been switched on Discharged battery pack. The battery pack does not recharge The battery-charger has not bee led correctly.
Solution and/or has not been Verify that the battery pack is charged and that it has been correctly installed. Recharge the battery pack. en connected or instal- Inspect the connections of the battery-charger and the installation of the batteries. elded. Move to an another area. Adjust the volume level. Check that the CTCSS tone or DCS code corresponds to the one set by the parties you are communicating with. been selected.
Prodotto o importato da: CTE INTERNATIONAL s.r.l. Via. R.Sevardi 7- 42124 Reggio Emilia Italia www.midlandreurope.com In Italia l’uso di questo apparato è soggetto ad una dichiarazione. Prima dell’uso leggere attentamente le istruzioni. Se il prodotto contiene batterie: non gettare nel fuoco, non disperdere nell’ambiente dopo l’uso, usare gli appositi contenitori per la raccolta. Produced or imported by: CTE INTERNATIONAL s.r.l. Via. R.
