Instructions

BR03 instruction guide | 13
Reception is fragmented
and/or disturbed
The signal is very weak.
Try temporarily to disable
the Squelch by means of
the Monitor feature.
The transmission distance
is excessive and/or
there are obstacles in the
transmission path
Move closer to the party
you are communicating
with or to another area.
Other parties are using
the same channel
Check the trac on the
radio channel by means
of the Monitor feature
and select another chan-
nel if required.
The radio has been
installed too close to
equipment that causes
interference (televisions,
computers, etc.)
Increase the distance
between the radio and
this equipment.
Transmission is not
always possible
The channel is used by
an excessive number of
parties or the transmis-
sion has been barred due
to a busy channel.
Select another channel.
Ask the radio link provi-
der to disable the block
due to busy channel.
VOX causes the radio
to accidentally enable
transmission
The sensitivity and/or
environmental
noise is too high.
Reduce the VOX sen-
sitivity.
The VOX feature
requires speaking in a
loud voice
The sensitivity is too low.
If the environmental
noise is not high, increase
the sensitivity or use an
optional microphone.
The autonomy of the
battery pack is limited
Commission time is too
high.
Try reducing the
transmission time and/or
using a low power.
Logic related faults
(unreadable displayed
symbols, functions
blocked, etc.)
Incorrect setting caused
by a problem with the
power supply.
Recharge the battery
pack