Instructions

6 | BR03 instruction guide
4. Led indicator:
red: transmission;
orange: transmission with CTCSS/DCS tones;
green: reception.
5. Speaker
6. Microphone
7. Customizable hidden display
8. UP/DOWN controls: Press briefly to go forwards/backwards of
1 channel; if you keep the button pressed you will skip 10 channels
forwards/backwards.
In scan mode, the UP/DOWN controls allow to change the scan di-
rection.
If you press UP or DOWN, the channel in use will be shown even
though the display is turned o.
9. Side key1: the functions of this control can be personalized through
the programming software PRG-10. Briefly press this button to ac-
tivate the Monitor function; or keep it pressed to display the battery
status.
10. PTT: press to transmit, release to receive.
11. Speaker/mike jack 2 Pin Kenwood: allows the connection with exter-
nal accessories such as microphones, headsets, etc. When this jack is
not used, protect it with the proper rubber cap.
12. Micro USB port: the radio’s battery can also be recharged via USB.
Connect the USB cable supplied in the package into this port.
13. Li-Ion battery pack 3.7V 2300mAh