Instructions
18 | Midland G9PRO instruction guide
VOX function
Midland G9 PRO enables hands free conversations through the VOX fun-
ction: just speak in the direction of the microphone and the communication
will be automatically activated.
The VOX sensitivity can be adjusted in 3 dierent levels.
You can enable the VOX function with or without accessories.
The fourth level activated is the Vox TalkBack: if one radio is continuously
transmitting in VOX, the Vox TB will automatically stop the transmission after
20 seconds to allow the transmission to the other users as well.
To activate the VOX function press the MENU button till VOX appears on
the display.
Use ▲▼ to select the sensitivity levels:
1. Of: O;
2. 1: High
3. 2: Middle
4. 3: Low
5. 4: Talk Back (with high sensitivity)
To confirm your selection, press PTT or wait for 5 seconds.
To disable the VOX function, follow the procedure here above indicated and
select oF.
Vibra-Call function
Midland G9 PRO is equipped with the “Vibra-Call” feature, which provides a
silent alert for incoming calls.
1. To activate this feature, press the MENU button until the display shows
CALL
MENU
EMG
15
24
23
22
21
20
19
18
17
16
3
2
1
14
13
12
10
9
11
8
7
6
5
4
.
2. Use the ▲▼ buttons to disable or enable this feature (on: enables,
oF:disables).
3. Push PTT [11] to confirm or wait for 5 seconds.
CALL feature
Midland G9 PRO can send 5 dierent CALL tones. To send this audio signal
to other users, press the CALL/
CALL
MENU
EMG
15
24
23
22
21
20
19
18
17
16
3
2
1
14
13
12
10
9
11
8
7
6
5
4
key.
To select the CALL tones:
1. Press MENU, until the display shows “CA” and the active tone code.
2. By pushing ▲▼ you will hear the 5 pre-set melodies.
3. Confirm by pressing PTT or wait for 5 seconds.