Instructions

22 | Midland G9PRO instruction guide
Activating – Deactivating
1. Press MENU till the display shows “OUT” and “Or of”, select “Or on”
(activated) with the ▲▼ buttons.
2. Switch o both radios.
3. Turn them on at the same time.
To disable this function:
1. Push MENU till “OUT” and “Or on” are displayed;
2. Select “Or of” (disabled) with the ▲▼ buttons.
3. Confirm your selection by pushing PTT or wait for 5 seconds.
Display illumination
If there is insucient light to read the display, press briefly +/EMG and the
display illumination will activate for about 5 seconds. Every time the MENU is
pressed, the display will automatically light up.
Power save
The battery power saving feature enables a reduction in the consumption of up
to 50%; power saving comes on automatically when the transceiver does not
receive any signal for more than 7 seconds. When the batteries are dischar-
ged, the icon
CALL
MENU
EMG
15
24
23
22
21
20
19
18
17
16
3
2
1
14
13
12
10
9
11
8
7
6
5
4
appears on the display: replace the batteries or recharge the
battery pack.
The power save is active only if the Emergency function is disabled.