Instructions

Midland G9 PRO instruction guide | 9
Your Midland G9 PRO keeps you constantly updated about its operational
status through a Liquid Crystal Display (LCD). The symbols and their corre-
sponding parameters that may appear, according to the operational status of
the device, are described as follows:
1.
These two large digits indicate the selected channel
2.
VOX
VOX function activated
3.
This symbol appears when the keypad lock is activated
4.
Emergency function activated
5.
DW
Dual Watch activated
6.
Indicates the battery status
7.
Vibra-Call function activated
8.
Indicates if the Automatic Out of Range function loses
contact with the other radios
9.
RX
Reception mode
10.
TX
Indicates the transmission (PTT pressed)
11.
H (High)
L (Low)
High or low power selection. The output power of the big
PTT depends on your selection
12. DCS CTC
Indicate the type of sub audio tone selected
13.
These three small digits indicate the code of the CTCSS/
DCS tones selected (1-38 / 1-104)
14.
Roger Beep activated
15.
PMR
This simbol indicates that the radio is operating on the new
PMR446 channels