DUAL BAND FUNKGERÄT PMR446/LPD › Anleitung bis zu 8Km* * abhängig vom Gelände XT50 PRO
Eigenschaften • Dual Band LPD/PMR446 Funkgerät 85 Kanäle: 69 LPD + 16 PMR446 • Wasserdicht nach IPX2 • Leistung: 500mW ERP (PMR446); 10 mW ERP (LPD) • Nachrauschunterdrückung • Beleuchtete LCD Anzeige • Batteriestandsanzeige • Auto Power Save: automatische Stromsparschaltung • 38 CTCSS- und 83 DCS-Töne in TX und RX • CALL-Funktion • RRM-Kanal (nur für Italien) • Batterielaufzeit bis zu 12 Stunden • SCAN-Funktion • Monitor-Funktion • Tastatursperre • Roger Beep ein/aus • VOX für Freisprechkommunikation mit 6
Lieferumfang • • • • 2x XT50 Pro Funkgeräte mit Gürtelclip 2x wiederaufladbare Akkus 700mAh 1x USB-/Mikro-USB Ladekabel 2x Headsets MA21Li (nur in der Kofferversion) Funkreichweite Die maximal erzielbare Reichweite hängt wesentlich von den Umgebungsbedingungen ab. Auf freiem Feld und von Bergen oder hohen Gebäuden aus ist die Reichweite am größten. Die Reichweite wird im Wesentlichen nur durch Hindernisse im Ausbreitungsweg begrenzt, wie Gebäuden, Baumbestand, Hügel oder größere Metallkonstruktionen.
Bedienungselemente und Funktionen Anzeige 3 10 6 PTT SPK 2 5 MIC PTT SPK 8 MIC 1 7 4 9 XT50 PRO XT50 PRO Kanalanzeige VOX - Freisprechfunktion aktiviert - Tastensperre aktiv H/L - Zeigt die Auswahl zwischen hoher und niedriger Leistung beim Senden an (nur im PMR-Band) - Batteriestatus 5. 6. RX - Funkgerät ist empfangsbereit 7. TX - Funkgerät sendet (PTT Taste ist gedrückt) 8. DCS/CTCSS - Zeigt den gewählten Unterton-Typ an 9. Gewählter CTCSS oder DCS Ton (CTCSS: 1-38; DCS: 1-83) 10.
Funkgerät 1 2 SPK 3 MIC 4 8 5 6 5 7 PTT SPK PTT SPK XT50 PRO 9 MIC MIC 12 10 11 XT50 PRO 4| XT50 PRO Anleitung
Antenne LCD Anzeige MENU/ - Drücken Sie diese Taste, um das Gerät ein- oder auszuschalten oder um das Menü des Radios aufzurufen. 4. CALL/ – Drücken Sie diese Taste, um das Tastenfeld zu sperren oder ein Rufsignal zu senden. 5. ▲-▼ Tasten - Verwenden Sie diese Tasten, um die Lautstärke einzustellen und die Kanäle und Funktionen auszuwählen. 6. Mikrofon 7. Lautsprecher 8. MON/SCAN - aktivieren/deaktivieren Sie die Scan- und Monitor Funktionen. 9.
Grundfunktionen Das Funkgerät ein- und ausschalten Drücken Sie 3 Sekunden lang MENU/ . Kanalwahl Einmal auf den “MENU” Knopf drücken und dann mit den ▲/▼ Tasten den Kanal aussuchen. Jetzt tippen Sie einmal auf die Sendetaste PTT (das bestätigt jeweils Ihre Auswahl). Denken Sie daran: Alle Geräte, die miteinander in Verbindung treten sollen, müssen auf die gleiche Kanalnummer im Display eingestellt werden. Senden Drücken Sie die Sendetaste (PTT) und halten Sie die Taste gedrückt, solange Sie sprechen.
• • • • • • • VOX Freisprechfunktion Roger Beep ein/aus Kanaleinstellung CTCSS/DCS-Toneinstellung Tastentöne Auswahl hohe/niedrige Leistung (PMR-Band) Auswahl des Tons für die CALL-Funktion VOX Funktion und Empfindlichkeit Mit der VOX-Funktion können Sie die Übertragung per Sprache aktivieren, ohne die PTT-Taste zu betätigen. Um die VOX-Funktion optimal nutzen zu können, müssen Sie zunächst die Empfindlichkeit (Geräuschpegel) bestimmen, die zur Aktivierung der VOX erforderlich ist.
PMR446/LPD-Kanaleinstellung Drücken Sie einmal die Menütaste und wählen Sie dann mit den ▲/▼Tasten den gewünschten Kanal. Drücken Sie PTT Taste, um die Auswahl zu bestätigen. CTCSS Ton Auswahl Das XT50 PRO kann in zwei Modi empfangen: a. Offener Kanal (kein CTCSS/DCS): In diesem Fall hören Sie jede Kommunikation, die auf dem ausgewählten Kanal übertragen wird b.
2. 3. Wählen Sie mit ▲/▼ einen der 5 voreingestellten Ruftöne. Bestätigen Sie durch Drücken der PTT-Taste oder warten Sie 5 Sekunden. Jedes Mal, wenn Ihr XT50 PRO nun einen Funkspruch aussendet, ertönt die ausgewählte Melodie. Wahl zwischen hoher / niedriger Sendeleistung (PMR-Band) Um die Batterielebensdauer zu verlängern, können Sie für Übertragungen über kurze Entfernungen die niedrige Leistungsstufe wählen. 1. Drücken Sie die MENU-Taste 3 Mal bis “Pr H” wird angezeigt 2.
Sekunden wird der Suchlauf fortgesetzt. Die SCAN-Funktion aktivieren 1. Drücken Sie MON/SCAN. 2. Während der Scan-Modus läuft, können Sie mit den ▲/▼-Tasten die Suchrichtung auswählen. Die Funktion deaktivieren: Drücken Sie MON/SCAN oder PTT. Aufladen Wenn der Akkupack oder die Akkus leer werden, beginnt das Symbol zu blinken: Die Akkus müssen nun möglichst bald aufgeladen werden. Das Symbol blinkt nur, wenn das Funkgerät eingeschaltet ist. ACHTUNG Alkaline-Batterien können nicht aufgeladen werden.
Tipps zur Fehlersuche Ihr Midland XT50 ist für eine lange Lebensdauer konzipiert. Falls ein Problem auftreten sollte, versuchen Sie bitte zunächst in diesem Kapitel eine Lösung zu finden, bevor Sie das Funkgerät zu einer Reparatur einschicken. Reset Bei Fehlfunktionen (seltsame Anzeigen, blockierte Tasten und Funktionen usw.) kann u.U. die CPU Ihres Gerätes blockiert sein. Das kann durch äußere Einflüsse (wie bei jedem Computer) gelegentlich passieren, z.B.
Technische Eigenschaften Kanäle.............................................................................85: 69 LPD+16 PMR446 Frequenz....................................... 446.00625 ÷ 446.09375MHz (PMR446) ............................................................................. 433.075 - 434.775MHz (LPD) Kanalabstand......................................................12.5 KHz (PMR); 25 KHz (LPD) Stromversorgung.....................................................................
XT50 PRO Anleitung | 13
Prodotto o importato da: MIDLAND EUROPE srl Via. R.Sevardi 7, 42124 Mancasale - Reggio Emilia Italia - www.midlandeurope.com L’uso di questo apparato può essere soggetto a restrizioni nazionali. Prima dell’uso leggere attentamente le istruzioni. Produced or imported by: MIDLAND EUROPE srl Via. R.Sevardi 7, 42124 Mancasale - Reggio Emilia - Italy. Imported by: Alan-Nevada UK Unit 1 Fitzherbert Spur Farlington Portsmouth Hants. P06 1TT - United Kingdom - www.nevada.co.