Quick Start Guide

ER310 Quick Start Guide
To turn on the radio, plug in the Li-ion battery then press the BAND button. You can
now cycle through the AM, FM, and Weather bands by pressing the BAND button.
To turn off the radio, press and hold the BAND button for 2 seconds.
To enable weather alert, ensure you are on the correct weather channel, then press the
WX ALERT button. The “WX” icon on the LCD will ash.
To use the ashlight and SOS Morse code beacon, press the ashlight button on top
of the radio. The rst press will enable a dim beam. The second press will enable the
bright beam. The third press will enable the SOS Morse code beacon.
To enable the ultrasonic dog whistle, press and hold the ashlight/dog whistle button
for 2 seconds. A dog icon will appear on the LCD.
To charge the internal battery, connect the included charge cable to a USB power
source then connect the radio’s USB input port to the charge cable.
To charge a USB powered device, connect the device’s charge cable to the USB
output port of the radio, then connect the device to the charge cable. Once charging
is complete; disconnect the device and charging cable from the ER310. This will allow
you to operate the other features in your ER310.
To access the settings menu, hold down the WX ALERT button for 2 seconds.
2s
2s
2s