Owner's Manual
Table Of Contents
- Owner's Manual
- LCD DISPLAY
- CONTROLS
- BATTERY INSTALLATION
- INSTALLING THE BELT CLIP
- CHARGING THE BATTERY PACK
- BATTERY LEVEL INDICATOR
- OPERATING YOUR RADIO
- POWER ON/OFF AND VOLUME
- TRANSMITTING AND RECEIVING A CALL
- ABOUT RANGE
- MONITOR
- SCAN
- CALL ALERT
- SOS SIREN
- KEYPAD LOCK
- DISPLAY ILLUMINATION
- CHANNEL SELECTION (GMRS BAND)
- USING THE RADIO IN GROUP MODE
- SETTING THE RADIO TO GROUP MODE
- SETTING GROUP CODES
- SETTING THE ID NUMBER
- SETTING THE CALLER ID NUMBER
- SETTING THE RING TONE
- MAKING A DIRECT CALL
- USING THE RADIO IN STANDARD MODE
- SETTING THE RADIO TO STANDARD MODE
- SETTING PRIVACY CODES
- TRANSMIT (TX) POWER LEVEL SELECTION
- VOX (Hands-Free Transmission)
- SILENT OPERATION
- ROGER BEEP (end of transmission) TONE
- CALL ALERT SELECTION
- VIBRATE ALERT
- DUAL WATCH FUNCTION
- WHISPER FUNCTION
- NOAA WEATHER RADIO/SCAN
- NOAA WEATHER ALERT
- EXTERNAL SPEAKER/MICROPHONE JACK
- TROUBLESHOOTING GUIDE
- SPECIFICATIONS
- GMRS FREQUENCY CHART (MHz)
- MIDLAND PRESET CHANNELS
- NOAA WEATHER (WX) RADIO FREQUENCY CHART (MHz)
- PRIVACY CODES FREQUENCY CHART (Hz)
- DCS PRIVACY CODE CHART
- WARRANTY
- ACCESSORIES
- Quick Start Guide
- Product Info
Model GXT1000/1030/1040/1050/1191 Series
Page 10
midlandusa.com
Note: To communicate between two radios in Group Mode, the
radios in your group must be set to the same channel and
Group Code selections.The GROUP Mode function only
operates on channels 1~22.
SETTING THE RADIO TO GROUP MODE
To turn the GROUP MODE on, press the MENU button until the
display shows “Gr” blinking, while an “oF” appears on the right of
the display. Select “on” by pressing the
s\t
buttons and press the
PTT button to confirm or press the MENU button again to move to the
next feature setting. When the radio is in GROUP MODE the Group
Mode icon will appear on the display.
SETTING GROUP CODES
Your radio has 142 Group Codes available. To select a Group Code
press the MENU button while in Group Mode until the Privacy Code
blinks, and then the
s\t
buttons to select one of the 142 Group
Codes. The Privacy Code icon on the display will indicate your
Group Code setting. To confirm the selection, press the PTT button or
press the MENU button again to move to the next feature setting.
SETTING THE ID NUMBER
Your radio has 10 ID Numbers available. The selected ID Number
may be different for each Group Code. To select an ID Number for
the current Group Code press the MENU until the display shows
“Id,” while the current ID number setting appears blinking on the
right of the display. Press the
s\t
buttons to select one of the 10 ID
Numbers. To confirm the selection, press the PTT button or press the
MENU button again to move to the next feature setting.
SETTING THE CALLER ID NUMBER
You can select your individual 4-digit Caller ID Number to indicate
you when making “direct call” to other radios within your group. To
set your Caller ID Number within the current channel, Group Code
and ID number press the MENU button while in Group Mode 5 times,
and then press the
s\t
buttons to select “1 ~ 9” on each digit. To
move to another digit press the MON/SCAN button. To confirm the
selection, press the PTT button or press the MENU button again to
move to the next feature setting.
!