Owner's Manual
Table Of Contents
- Owner's Manual
- LCD DISPLAY
- CONTROLS
- BATTERY INSTALLATION
- INSTALLING THE BELT CLIP
- CHARGING THE BATTERY PACK
- BATTERY LEVEL INDICATOR
- OPERATING YOUR RADIO
- POWER ON/OFF AND VOLUME
- TRANSMITTING AND RECEIVING A CALL
- ABOUT RANGE
- MONITOR
- SCAN
- CALL ALERT
- SOS SIREN
- KEYPAD LOCK
- DISPLAY ILLUMINATION
- CHANNEL SELECTION (GMRS BAND)
- USING THE RADIO IN GROUP MODE
- SETTING THE RADIO TO GROUP MODE
- SETTING GROUP CODES
- SETTING THE ID NUMBER
- SETTING THE CALLER ID NUMBER
- SETTING THE RING TONE
- MAKING A DIRECT CALL
- USING THE RADIO IN STANDARD MODE
- SETTING THE RADIO TO STANDARD MODE
- SETTING PRIVACY CODES
- TRANSMIT (TX) POWER LEVEL SELECTION
- VOX (Hands-Free Transmission)
- SILENT OPERATION
- ROGER BEEP (end of transmission) TONE
- CALL ALERT SELECTION
- VIBRATE ALERT
- DUAL WATCH FUNCTION
- WHISPER FUNCTION
- NOAA WEATHER RADIO/SCAN
- NOAA WEATHER ALERT
- EXTERNAL SPEAKER/MICROPHONE JACK
- TROUBLESHOOTING GUIDE
- SPECIFICATIONS
- GMRS FREQUENCY CHART (MHz)
- MIDLAND PRESET CHANNELS
- NOAA WEATHER (WX) RADIO FREQUENCY CHART (MHz)
- PRIVACY CODES FREQUENCY CHART (Hz)
- DCS PRIVACY CODE CHART
- WARRANTY
- ACCESSORIES
- Quick Start Guide
- Product Info
Model GXT1000/1030/1040/1050/1191 Series
Page 13
midlandusa.com
VOX (Hands-Free Transmission)
Your radio has 9 VOX level settings: (oF/1~9).
To set VOX, press the MENU button until the display shows “VOX”.
On the right of the CHANNEL NUMBER display, an “oF” icon
appears. Select “1” ~ “9” by pressing the
s\t
buttons and push the
PTT key, or press the MENU button again to move to the next feature
setting. VOX will be more sensitive on the lower setting than on the
higher setting.
To turn VOX off, press the MENU button until the display shows
“VOX”. On the right of the CHANNEL NUMBER display, a “1” ~ “9”
icon appears. Select “oF” by pressing the
s\t
buttons and push the
PTT key, or press the MENU button again to move to the next feature
setting.
SILENT OPERATION
Your radio has a SILENT OPERATION mode. In this mode, all
“beeps” and “tones” are disabled.
To set the SILENT OPERATION, press the MENU button until the
display shows a “bP” icon. Select “on” or “oF” by pressing the
s\t
buttons and push the PTT key or MENU button.
ROGER BEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished.
To set the ROGER BEEP tone, press the MENU button until the
display shows an “rb”. Select “on” or “oF” by pressing the
s\t
buttons and push the PTT key, or press the MENU button to move to
the next feature setting.
CALL ALERT SELECTION
Your radio has 10 selectable CALL ALERTS (15 for GXT1050). To
select, press the MENU button until a “CA” icon appears and to the
right of the “CA” icon the current CALL ALERT setting is displayed.
Then press the
s\t
buttons to make the CALL ALERT selections,
and the radio will emit a corresponding tone for each selection. To
confirm, press the PTT button or press the MENU button to move to
the next feature setting.
Note : GXT1050 has 5 additional “Animal Sound” CALL Alerts -
Cougar, Duck, Crow, Wolf, and Turkey.