User's Manual

SOS SIREN
To activate the SOS SIREN function, press and hold the DOWN/ SOS
SIREN button for 5 seconds. The icon will appear on the display,
the radio will send out a loud siren sound and the display will flash. To
deactivate the SOS SIREN function press the PTT button twice.
Warning: The SOS Siren is to be used only in the event of
an emergency. Midland Radio Corporation is not responsible
if there is no response to the SOS Siren.
KEYPAD LOCK
To avoid accidentally changing the radio settings, press the LOCK
button for 2 seconds. The icon will appear on the display. PTT and
CALL will still be active. Repeat the same procedure to unlock the
keypad.
DISPLAY ILLUMINATION
During Power on, the display illumination will activate for approx. 5
seconds. The display illumination can also be activated when the
MENU, MON/SCAN, or
s\t
buttons are pressed.
CHANNEL SELECTION (GMRS BAND)
Press the MENU button once, and then the
s\t
buttons to select
one of the 50 GMRS channels. To confirm the selection, press the
PTT button or press the MENU button again to move to the next
feature setting.
USING THE RADIO IN GROUP MODE
Your radio has a GROUP MODE function which lets you make “direct
calls” to other people within the group without alerting the entire
group. The
GROUP MODE function only works on channels 1~22. It
does not operate on channels 23~50.
In order to use the GROUP MODE function you need to set the
following in your radio:
l Set the radio to Group Mode
l Set a Group Code
l Set the ID
l Set the Caller ID
l Set the Ring Tone
Model GXT1000/1030/1040/1050/1191 Series
Page 9
midlandusa.com
!