User's Manual

Model GXT1000/1030/1040/1050/1191 Series

Page 10

midlandusa.com

Note: To communicate between two radios in Group Mode, the

radios in your group must be set to the same channel and

Group Code selections.The GROUP Mode function only

operates on channels 1~22.

SETTING THE RADIO TO GROUP MODE

To turn the GROUP MODE on, press the MENU button until the

display shows “Gr” blinking, while an “oF” appears on the right of

the display. Select “on” by pressing the

s\t

buttons and press the

PTT button to confirm or press the MENU button again to move to the

next feature setting. When the radio is in GROUP MODE the Group

Mode icon will appear on the display.

SETTING GROUP CODES

Your radio has 142 Group Codes available. To select a Group Code

press the MENU button while in Group Mode until the Privacy Code

blinks, and then the

s\t

buttons to select one of the 142 Group

Codes. The Privacy Code icon on the display will indicate your

Group Code setting. To confirm the selection, press the PTT button or

press the MENU button again to move to the next feature setting.

SETTING THE ID NUMBER

Your radio has 10 ID Numbers available. The selected ID Number

may be different for each Group Code. To select an ID Number for

the current Group Code press the MENU until the display shows

“Id,” while the current ID number setting appears blinking on the

right of the display. Press the

s\t

buttons to select one of the 10 ID

Numbers. To confirm the selection, press the PTT button or press the

MENU button again to move to the next feature setting.

SETTING THE CALLER ID NUMBER

You can select your individual 4-digit Caller ID Number to indicate

you when making “direct call” to other radios within your group. To

set your Caller ID Number within the current channel, Group Code

and ID number press the MENU button while in Group Mode 5 times,

and then press the

s\t

buttons to select “1 ~ 9” on each digit. To

move to another digit press the MON/SCAN button. To confirm the

selection, press the PTT button or press the MENU button again to

move to the next feature setting.