User's Manual

Model GXT1000/1030/1040/1050/1191 Series
Page 11
midlandusa.com
SETTING THE RING TONE
Your radio has 5 selectable Ring Tones. Your selected ring tone will
be played back when receiving a “direct call” from another person
with the same Group Code and ID Number. To select a Ring Tone for
the current Group Code and ID Number press the MENU button until
an “rt” appears on the display, and then the
s\t
buttons to make
the selection. To confirm the selection, press the PTT button or press
the MENU button again to move to the next feature setting.
MAKING A DIRECT CALL
Your radio has a “direct call” function which enables you to call
another person without alerting the other people within the group.
In order to make a direct call to another radio while in Group Mode,
both must have the same channel, Group Code, and ID Number.
To make a “direct call” press the CALL button while in Group Mode,
an “AL” will appear on the display. Press the
s\t
buttons to select
the ID Number of the radio that you will call. Press the CALL button
again to send the direct call. Only the radio with the same ID Number
will receive the call.
You can also send a “direct call” to all
the radios within the group.
Press the CALL button while in Group Mode, an “AL” will appear on
the display. Press the CALL button again to send the direct call and
all the radios within the group will receive the call.
USING THE RADIO IN STANDARD MODE
You can set your radio to Standard Mode to communicate with radios
which do not have the Group Mode feature.
SETTING THE RADIO TO STANDARD MODE
To turn the STANDARD MODE on, press the MENU button until the
display shows “Gr” blinking, while “on” appears on the right of the
display. Select “of” by pressing the
s\t
buttons and press the PTT
button to confirm or press the MENU button again to move to the next
feature setting.
When the radio is in STANDARD MODE the Group Mode icon will
disappear from the display
.