User's Manual

Model GXT1000/1030/1040/1050/1191 Series
Page 14
midlandusa.com
VIBRATE ALERT
To set the VIBRATE ALERT, press the MENU button until the display
shows the icon. Select “on” or “oF” by pressing the
s\t
buttons
and push the PTT button, or press the MENU button. The icon will
remain on the display if set to “on”.
DUAL WATCH FUNCTION
Your radio has a DUAL WATCH function, to enable user to scan 2
channels for any activity. The first channel will be the current channel
setting and the second channel will be the selected channel on the
MENU.
To turn the DUAL WATCH on, press the MENU button until the “oF”
icon appears blinking on the left of the display, while the “dU” icon
appears on the right. Select the second channel by pressing the
s\t
button. Press the MENU button again and the
s\t
buttons to
choose the Privacy Code (oF/dc/ct). Then press the MENU button
again and the
s\t
buttons to set the Privacy Code. Please note
that the Privacy Code can be set only on Ch 1~22. To confirm,
press the PTT button or the MENU button.
The RX and TX icon will appear at the same time to signify that the
DUAL WATCH function is on and the radio will start to scan both the
current channel/code-in-use and the selected channel/code and stop
on any active channel. Your radio will resume scanning after 4
seconds when the channel is no longer active. When you press the
PTT button to transmit on an active channel, the scanning function
will stop and remain on the active channel for 10 seconds before
resuming scan when the PTT button is no longer pressed. To resume
scanning, quickly press the
s\t
button.
To turn the DUAL WATCH function off, press the SCAN button.
Note : When the Group Mode is on, you cannot set the
Privacy Code of the second channel. It will follow the
Group Code of the first channel.
WHISPER FUNCTION
Your radio has a WHISPER function, to enable the user to transmit a
high sound level even if he is whispering on the microphone.
To set the WHISPER function, press the MENU button until the
display shows the WI icon blinking. Select “on” or “oF” by pressing
the
s\t
buttons and push the PTT button, or press the MENU
button.The WI icon will remain on the display if set to “on”.
!