User Manual

Page 25
midlandusa.com
Model MXT115
Page 24
midlandusa.com
Model MXT115
5.When the desired color has been selected, press the Monitor/Scan
/ button to conrm your selection.
YOU MUST PRESS THE MONITOR/
SCAN BUTTON TO CONFIRM YOUR SELECTION OR THE BACKGROUND COLOR
WILL NOT BE CHANGED
RESTORING THE DEFAULT SETTINGS
You can restore the original (factory default) settings for your MXT115 at
any time.
To restore the default settings:
1. Be sure the radio is turned o󰀨 (see Power On/O󰀨).
2. Press and hold the PTT and the Weather button simultaneously..
3. With the buttons still held, turn on the radio.
▪ All user settings will be cleared, returning the radio to all default
settings.
CARE AND MAINTENANCE
CAUTION: DO NOT use alcohol or cleaning solutions to clean the
radio. DO NOT immerse the radio in water.
1. Use a soft cloth moistened with water to clean the radio.
2. Dry the radio with a dry lint-free cloth should it get wet.
TROUBLESHOOTING GUIDE
If you experience di󰀩culties using your MXT115, refer to the following
chart to correct common operation problems. If you have a problem which
you believe requires service, please call rst and speak with a service
technician at 816-241-8500. Many problems can be remedied over the
phone without returning the unit for service.
.
PROBLEM
No Power
Cannot Receive
Messages
Check vehicle power source (battery); replace
as needed.
Check input power connection and/or wires to
vehicle power source.
Verify both radios have the same channel
selection and Privacy Code settings.
Conrm communication is not a󰀨ected by buildings
and other structures ( see About Range)
Make sure keypad “lock” is not on
(see Locking the Keypad)
Conrm your backlight setting is enabled
Make sure you are within range of the other radio.
Reset the radio ( turn radio o󰀨 then back on)
Keypad is not
Responding
Display Backlight
is Dim
SOLUTION