Installation Instructions

Model MXT400
5. Press the Select button to confirm the receive privacy tone selection and
move to transmit privacy tone selection, TCP.
6. Turn the Channel knob to choose TSQ for TCP selection.
7. Press the Select button.
8. Turn the channel knob to choose the desired transmit CTCSS tone.
9. Press the Select button to confirm the transmit privacy tone selection
and exit.
To Select a DCS Privacy Code:
The receive and transmit privacy codes may be set independently. RCP is
used to set the receive privacy code, which may be called the repeater
output code for repeater channels. TCP is used to set the transmit privacy
code, which may be called the repeater input code for repeater channels.
1. Press the TS/DCS button to enter receive privacy code selection
mode, RCP.
2. Turn the Channel knob to choose DCS for the RCP selection.
3. Press the Select button.
4. Turn the Channel knob to choose the desired receive DCS code
number. See the DCS Privacy Code Chart near the end of this
manual to equate the code number to the DCS code.
5. Press the Select button to confirm the receive privacy code selection
and move to transmit privacy code selection, TCP.
6. Turn the Channel knob to choose DCS for TCP selection.
7. Press the Select button.
8. Turn the Channel knob to choose the desired transmit DCS code
number. See the DCS Privacy Code Chart near the end of this
manual to equate the code number to the DCS code.
9. Press the Select button to confirm the transmit privacy code selection
and exit.
Page 18
midlandusa.com