Installation Instructions

Page 19
midlandusa.com
Model MXT400
NOTE: To disable privacy tones/codes, select OFF for either or both
receive privacy, RCP, and transmit privacy, TCP.
NOTE: CTCSS selections will be indicated by the T SQ icons on the
display. DCS selections will be indicated by the DCS icon on the display.
NOTE: Press the TS/DCS button repeatedly to review the receive and
transmit privacy selections without making changes.
NOTE: When a new receive privacy selection is confirmed by pressing the
Select button, it is copied to the transmit privacy selection. Pressing the
Select button to exit will confirm the new transmit privacy selection.
Selecting the Transmit (TX) Power Level
The MXT400 provides up to 3 transmit power levels; Hi, Mi and Lo. The Lo
power level is generally suitable when operating under optimum conditions
(see About Range). The Hi power level is recommended to ensure you
get maximum range from your radio.
To adjust the Transmit Power Level:
1. Press the Plvl button to toggle the transmit power setting between Hi,
Mi and Lo.
Only the Mi and Lo transmit power settings will be indicated on the
LCD, when neither Mi or Lo is indicated the unit is set to Hi transmit
power.
Due to output power regulations channels 1 through 7 cannot be
removed from the Lo transmit power setting.