Installation Instructions

Page 5
midlandusa.com
Model MXT400
FCC NOTICE
The MXT400 operates on GMRS (General Mobile Radio Service)
frequencies, which require a Federal Communications Commission
(FCC) license. You must be licensed prior to operating on channels 1-7,
15-22 or RP15-22, which comprise the GMRS channels of the MXT400.
Serious penalties may result from unlicensed use of GMRS channels, in
violation of FCC rules, as stipulated in the Communications Act’s Sections
501 and 502 (amended). You will be issued a call sign by the FCC that
GMRS channels. You should also cooperate by engaging in permissible
transmissions only, avoiding channel interference with other GMRS users,
and being prudent with the length of your transmission time.
To obtain a license or ask questions about the license application, contact
the FCC at 1-888-CALL FCC or go to the FCC’s website:
http:// www.fcc.gov and request form 605.
Exposure To Radio Frequency Energy
Your Midland radio is designed to comply with the following national and
international standards and guidelines regarding exposure of human
beings to radio frequency electromagnetic energy.
United States Federal Communications Commission, Code of Federal
Regulations: 47 CFR part 2 sub-part J
American National Standards Institute (ANSI)/Institute of Electrical &
Electronics Engineers (IEEE) C95. 1-1992
Institute of Electrical and Electronics Engineers (IEEE) C95. 1-1999 Edition
National Council on Radiation Protection and Measurements (NCRP) of
the United States, Report 86, 1986
International Commission on Non-lonizing Radiation Protection
(ICNIRP) 1998
To control your exposure and ensure compliance with the general
population or uncontrolled environment exposure limits:
1. Transmit no more than 50% of the time. The radio generates measurable
RF energy exposure only when transmitting
2. Use an antenna with maximum gain of 2.1 dBi including coax losses
3. Maintain a minimum safe separation distance of 51 inches (130 cm)
between the antenna and all persons when transmitting