Owner's Manual
Table Of Contents
- Owner's Manual
- Table of Contents
- Welcome
- Features
- FCC Notice
- Exposure to Radio Frequency Energy
- Installing Your Radio
- Controls & Indicators
- Operating Your Radio
- Utility Functions
- Menu Mode Functions
- Restoring the Default Settings
- Care & Maintenance
- Menu - Quick Reference Chart
- Troubleshooting Guide
- Specs
- FCC Warning & Statements
- Warranty
- Quick Start Guide
- Programming Guide
- Product Info
Page 28
midlandusa.com
Model MXT500
1. Press the MENU button to enter the menu. Use the CHANNEL/MENU
SELECTION knob to navigate to menu setting #13 - USB.
2. To enable or disable USB-C programming, press the CHANNEL/MENU
SELECTION knob. Use the CHANNEL/MENU SELECTION knob to
choose between ON or OFF. Press the CHANNEL/MENU SELECTION
knob to conrm your selection.
3. Press the MENU button to exit the USB-C programming settings.
Restoring the Default Settings
You can restore the factory (default) settings for your MXT500 at any time.
1. Press the MENU button to enter the menu. Use the CHANNEL/MENU
SELECTION knob to navigate to menu setting #14 - RESTORE.
2. To reset your radio, press the CHANNEL/MENU SELECTION knob.
Use the CHANNEL/MENU SELECTION knob to select FACT. Press the
CHANNEL/MENU SELECTION knob to conrm your selection.
3. Once reset, the radio will restart with the factory settings
CARE AND MAINTENANCE
CAUTION: DO NOT use alcohol or cleaning solutions to clean the radio.
DO NOT immerse the radio in water.
1. Use a soft cloth moistened with water to clean the radio.
2. Dry the radio with a dry lint-free cloth should it get wet.