Owner's Manual
Table Of Contents
- Owner's Manual
- Table of Contents
- Welcome
- Features
- FCC Notice
- Exposure to Radio Frequency Energy
- Installing Your Radio
- Controls & Indicators
- Operating Your Radio
- Utility Functions
- Menu Mode Functions
- Restoring the Default Settings
- Care & Maintenance
- Menu - Quick Reference Chart
- Troubleshooting Guide
- Specs
- FCC Warning & Statements
- Warranty
- Quick Start Guide
- Programming Guide
- Product Info
Page 29
midlandusa.com
Model MXT500
Check vehicle power source (battery); replace
as needed.
TROUBLESHOOTING GUIDE
If you experience difculties using your MXT500, refer to the following
chart to correct common operation problems. If you have a problem which
you believe requires service, please call our Midland customer service
representatives at 816-241-8500 on Monday – Friday between 8 AM to
4:30 PM CST. Many problems can be remedied over the phone without
returning the unit for service.
PROBLEM
No Power
Cannot Receive
Messages
Check input power connection and/or wires to
vehicle power source.
Verify both radios have the same channel
selection and Privacy Code settings.
Conrm communication is not affected by buildings
and other structures (see About Range).
Make sure keypad “lock” is not on
(see Locking the Keypad).
Conrm your backlight setting is enabled.
Make sure you are within range of the other radio.
Reset the radio (turn radio off then back on).
Keypad is not
Responding
Display Backlight
is Dim
SOLUTION