Owner's Manual
Table Of Contents
- Owner's Manual
- Table of Contents
- Welcome
- Features
- FCC Notice
- Exposure to Radio Frequency Energy
- Installing Your Radio
- Controls & Indicators
- Operating Your Radio
- Utility Functions
- Menu Mode Functions
- Restoring the Default Settings
- Care & Maintenance
- Menu - Quick Reference Chart
- Troubleshooting Guide
- Specs
- FCC Warning & Statements
- Warranty
- Quick Start Guide
- Programming Guide
- Product Info
[3]
Midland Radio Corporation
midlandusa.com
Channel Edit Screen
The Channel Edit screen allows per channel options configuration. To open the Channel Edit screen, double click
anywhere on the desired channel row of the CH screen. Or place the cursor on the desired row and select CH Edit
from the Edit menu.
RX Frequency
The default receive frequency is displayed for the channel. Channels 8 -14 will allow any valid receive frequency
within the MXT500 UHF receiver’s bandwidth to be entered.
TX Frequency
The default transmit frequency is displayed for the channel. Channels 8-14 will allow transmit frequency selection
from the 16 predefined GMRS main frequencies.
CH Name
A seven character alpha-numeric channel name may be entered, that will show on the MXT500 display in place of
the normal channel number. The characters display as all caps, but are best entered without using the shift key on
the keyboard.
Step
Unused in the MXT500 application, selection can be left at 12.5 kHz.
Channel Spacing
Selecting 12.5 kHz will set the radio for maximum ±2.5 kHz deviation, or narrow band mode. Same function as
selecting NB-ON in the radio menu. Selecting 25 kHz will set the radio for maximum ±5 kHz deviation, or wide
band mode. Same function as selecting NB-OFF in the radio menu.