Owner's Manual

[6]
Midland Radio Corporation
midlandusa.com
TBST Frequency
Selects the burst tone frequency that might be used to open a repeater. The burst tone is sent by pressing the
microphone channel DN button while PTT is pressed.
Time Out Timer
Selects the maximum time for continuous transmission. Same function as TOT in the radio menu.
Auto Power Off
Selects the idle time before the radio will turn off. Same function as APO in the radio menu.
Mute
Selecting On disables the keypad tones. Same function as MUTE in the radio menu.
CSQ Tail Eliminator
Selects the frequency used for squelch tail elimination on carrier squelch channels. 55 Hz matches other Midland
FRS and GMRS radios.
Weather Channel Number
Selects a default weather channel.
Call Tone
Selects a call tone sequence. The call tone is sent by pressing the microphone channel UP button while PTT is
pressed.
Repeater Frequency Display
Selecting On displays the repeater channels on the CH screen and enables the repeater channels in the radio’s
channel list. Same function as REP in the radio menu.
Color
Selects the backlight color. Same function as COL in the radio menu.
Tail Eliminator Type
Selects the type of squelch tail elimination used on CTCSS channels. 55 Hz matches other Midland FRS and GMRS
radios.
Choose TX Power
Selects the maximum transmit power output.
Inhibit Initialize Operation
Check to disable the Factory Restore menu function.
Mic Audio
Check to enable microphone audio to the transmitter from the rear panel intercom jack.
External Audio
Check to enable receive audio out from the rear panel intercom jack.