Owner's Manual
Table Of Contents
- Owner's Manual
- Features
- Important Notice
- LCD Display
- Controls
- Battery Installation
- Installing the Belt Clip
- Charging the Battery Pack
- Battery Level Indicator
- Operating Your Radio
- T50 Series Quick Reference Chart
- Monitor
- Scan
- Call Alert
- Keypad Lock
- Channel Selection (FRS Band)
- Setting Privacy Codes
- Transmit (TX) Power Level Selection
- VOX
- Roger Beep (end of transmission) Tone
- Call Alert Selection
- Vibrate Alert (Model T75 Only)
- Silent Operation
- NOAA Weather Radio/Scan
- NOAA Weather Alert
- External Speaker/Microphone Jack
- Troubleshooting Guide
- Use & Care
- Specs
- DCS Privacy Code Chart
- Warranty
- Accessories
- Weather App Information
Model T70 Series
Page 12
midlandusa.com
To confirm, press the PTT button or press the MENU button to move
to the next feature setting.
To turn the NOAA WEATHER RADIO off, press the PTT button. The
current FRS radio setting will be displayed and the icon will go off.
NOAA WEATHER ALERT
Your radio has a NOAA WEATHER ALERT function, to enable you
to automatically receive weather alerts from designated NOAA
stations.
The NOAA WEATHER (WX) ALERT is automatically on during
NOAA WEATHER SCAN mode.
To turn the NOAA WEATHER (WX) ALERT on during normal NOAA
WEATHER RADIO mode, press the MENU button twice while in
NOAA WEATHER SCAN mode. The display shows "AL," while on
the right an "oF" icon appears. Select "on" by pressing the
s\t
buttons. To confirm, press the PTT button or press MENU. The radio
will return to WX BAND and the icon will blink. If the radio receives
a WX ALERT signal from a designated NOAA station while on FRS
Radio mode, the radio will beep for 20 seconds while an "AL" and
"In" icon will appear on the display, after which it will automatically go
to WX BAND.
If any button is pressed during beeping while on FRS Radio mode,
the radio will automatically go to WX BAND.
To turn the NOAA WEATHER (WX) ALERT off, press the MENU
button twice while in WX Band. The display shows "AL," while on the
right an "on" icon appears. Select "oF" by pressing the
s\t
buttons. To confirm, press the PTT button or press MENU.
Note : The WX Alert is automatically ON during WX SCAN
mode.
!