Owner's Manual
Table Of Contents
- Owner's Manual
- Features
- Important Notice
- LCD Display
- Controls
- Battery Installation
- Installing the Belt Clip
- Charging the Battery Pack
- Battery Level Indicator
- Operating Your Radio
- T50 Series Quick Reference Chart
- Monitor
- Scan
- Call Alert
- Keypad Lock
- Channel Selection (FRS Band)
- Setting Privacy Codes
- Transmit (TX) Power Level Selection
- VOX
- Roger Beep (end of transmission) Tone
- Call Alert Selection
- Vibrate Alert (Model T75 Only)
- Silent Operation
- NOAA Weather Radio/Scan
- NOAA Weather Alert
- External Speaker/Microphone Jack
- Troubleshooting Guide
- Use & Care
- Specs
- DCS Privacy Code Chart
- Warranty
- Accessories
- Weather App Information
Model T70 Series
Page 14
midlandusa.com
PROBLEM SOLUTION
No Power - Check battery installation and/or replace batteries.
Cannot Receive
Messages
- Confirm the radios have the same channel
settings.
- Make sure that you are within range of the other
transceivers.
- Buildings and other structures may interfere with
your communication.
Radio is not responding
to button presses
- Make sure key lock is not on (See Keypad Lock,
Page 9).
- Radio might need to be reset. Turn radio off then
on.
Display is dim - Recharge or replace batteries.
Charger not functioning - Contacts on the bottom of the radio may require
cleaning.
- Ensure the outlet where the charger is plugged
in is functioning properly.
- Check that the battery pack is installed in the radio
properly.
USE AND CARE
1. Use a soft damp cloth to clean the radio.
2. Do not use alcohol or cleaning solutions to clean the radio.
3. Do not immerse the radio in water.
4. Dry the radio with a dry lint-free cloth should it get wet.
5. Turn off the radio and remove the batteries during long-term
storage.
If you have a problem which you believe requires
service, please call first and speak with a service
technician at 816-241-8500. Many problems can be
remedied over the phone without returning the unit for
service.
TROUBLESHOOTING GUIDE