Owner's Manual
Table Of Contents
- Owner's Manual
- Features
- Important Notice
- LCD Display
- Controls
- Battery Installation
- Installing the Belt Clip
- Charging the Battery Pack
- Battery Level Indicator
- Operating Your Radio
- T50 Series Quick Reference Chart
- Monitor
- Scan
- Call Alert
- Keypad Lock
- Channel Selection (FRS Band)
- Setting Privacy Codes
- Transmit (TX) Power Level Selection
- VOX
- Roger Beep (end of transmission) Tone
- Call Alert Selection
- Vibrate Alert (Model T75 Only)
- Silent Operation
- NOAA Weather Radio/Scan
- NOAA Weather Alert
- External Speaker/Microphone Jack
- Troubleshooting Guide
- Use & Care
- Specs
- DCS Privacy Code Chart
- Warranty
- Accessories
- Weather App Information
Model T70 Series
Page 4
midlandusa.com
LCD DISPLAY
1. TRANSMIT POWER LEVEL ICON –
Indicates TX Power setting (H/L).
2.
NOAA WEATHER (WX) BAND ICON –
Indicates when the radio is in Weather
Band mode.
3. KEY LOCK ICON – Indicates KEY
LOCK mode is on.
4. VOX ICON – Indicates when VOX mode
is active.
5. CHANNEL NUMBER – Changes from
1~36 on FRS band (1~10 on WX band).
6. VIBRATE ALERT ICON – Indicates when
the Vibrate-Alert feature is on (Model T75
only)
.
7. BATTERY METER – Indicates the battery
level.
8. RECEIVE (RX) ICON – Indicates radio is
receiving a transmission.
9. TRANSMIT (TX) ICON – Indicates radio
is transmitting a signal.
10. PRIVACY CODE ICON – Indicates
Privacy Code setting (CTCSS/DCS).
11. PRIVACY CODE – Indicates Privacy
Code selected by user (oF~38/oF~83). It
can only be set in Ch 1~22.
1
CONTROLS
12. POWER/VOLUME KNOB – Turn clock-
wise to turn the power on and increase
the volume level. Turn counter-clockwise
to decrease the volume level and turn
the power off.
13. PTT Button – Press and hold to
transmit voice communication.
14. CALL/LOCK Button – Press to send a
CALL ALERT signal. Press and hold to
turn KEY LOCK on/off.
15. MIC – Built-in microphone.
16. USB CHARGING JACK
17. ANTENNA
18. EXTERNAL SPEAKER/MIC JACK
19. MENU Button – Press momentarily to
access Menu mode.
20. MONITOR/SCAN Button – Press to
enter SCAN mode. Press and hold to
enter MONITOR mode.
21. UP/WX SCAN
s
and DOWN
t
Buttons – Make adjustments in MENU
mode. Press and hold the UP button for
5 seconds to activate the NOAA
Weather Scan function.
22. SPEAKER – Built-in speaker.
19
18
17
15
14
13
12
7
6
3
2
16
20
4
5
8
9
10
21
11
22