Operation Manual

6 | XT-50 instruction guide
1. VOX function activated
2. Appears when the keypad lock is activated
3. Battery level
4. It is displayed when the radio is receiving a signal
5. Appears when the radio is transmitting (PTT pressed)
6. Indicates the selected CTCSS tone
7. Indicates the selected channel
8. Antenna
9. LCD Display
10. SPK/MIC jack. Jack for the connection to external accessories such as
microphones, headsets, etc
11. MON/SCAN. With this button you can enable/disable the Scan and
Monitor functions
12. MENU/ : Press this control to turn on/o the unit and to enter the ra-
dio’s menu.
13. ▲/▼: use these buttons to adjust the volume, select the channels and
functions
14. Microphone
15. Speaker
16. /CALL. Press this button to lock the keypad and to send out a call signal.
17. PTT button
18. USB port for the recharge of the radio
19. Battery and battery compartment. The transceiver accepts the supplied
rechargeable battery pack or 3 x AAA alkaline/ rechargeable batteries.
To open the battery compartment, hold the unit face down and slide the
cover.
Attention: The supplied battery packs must be recharged before the first use (see
the section “Recharge” for more info).