Operation Manual

12 | XT70 user’s manual

ROGER BEEP (End transmission tone)

When your transmission is ﬁnished (PTT released), XT70 gives out a sound

that indicates to the other party that s/he can start talking. This function is

enabled by default.

To deactivate it:

1. Press the MENU button until the display shows “rb on”;

2. Using the scroll buttons ▲/▼ select “o” and “rb o” will be displayed;

3. To conﬁrm the roger beep deactivation, press PTT button or wait for 5

seconds.

CALL function

XT70 can send 5 dierent call tones. To send this audio signal to other users,

press the CALL/ key.

To select the call tones:

1. Push the MENU button 6 times, until the display shows “CA 1”.

2. By pushing ▲/▼ you will hear the 5 pre-set melodies.

3. Conﬁrm by pressing the PTT key or wait for 5 seconds.

Now, each time your XT70 sends out a tone call, it will beep with the selected

melody.

Keypad beep

To deactivate the keypad beep, follow these steps:

1. Press MENU button, until “bP on” is displayed.

2. Use the ▲/▼ buttons until the display shows “bP of”.

3. Conﬁrm by pushing the PTT or wait for 5 seconds.

Now you won’t hear any beep at the pressure of any button.