Owner's Manual

Model XT511 Series
Page 15
midlandusa.com
When the Battery Meter drops to 1 bar , the TX Power will
automatically switch from Hi(H) to Lo(L) level.
Note : You cannot adjust the power setting on the FRS
channels (8~14). They are set to Low power per FCC
regulations.
VOX (Hands-free Transmission)
Your radio has 9 VOX level settings: (oF/1~9).
To turn the VOX on, press the MENU/SOS button until the VOX icon
appears, while on the right, the “oF” setting appears. Turn the
TUNING knob to make the VOX setting selections. To confirm, push
the PTT key or press the MENU/SOS button again to move to the
next feature setting.
VOX will be more sensitive on the “1” setting than on the “9” setting.
To turn the VOX off, press the MENU/SOS button until the VOX icon
appears. Select “oF” by turning the TUNING knob. To confirm, push
the PTT key or press the MENU/SOS button again to move to the
next feature setting.
Note: For VOX Hands-free operation use Midland headset
accessories or built-in internal microphone.
SILENT OPERATION
Your radio has a SILENT OPERATION mode. In this mode, all
“beeps” and “tones” are disabled.
To set the SILENT OPERATION, press the MENU/SOS button until
the display shows a “bP” icon. Select “on” or “oF” by turning the
TUNING knob. To confirm, push the PTT key or press the MENU/
SOS button to move to the next feature setting.
When the SILENT OPERATION is off, the icon will appear on the
display.
ROGER BEEP (End of Transmission) TONE
When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished.
To set the ROGER BEEP tone, press the MENU/SOS button until the
display shows an “rb” icon. Select “on” or “oF” by turning the
TUNING knob.
!