User Manual

User’s Guide
625 Wireless Controls
9A429
This guide outlines basic operation of the
wireless hand / foot control and the associated
base station. If service is required, contact your
authorized Midmark dealer.
Dealer (name / phone):
__________________________________
__________________________________
__________________________________
__________________________________
Date of Purchase: __________________
Midmark Corporation
60 Vista Drive
Versailles, OH 45380-0286
Phone: [phone]
Fax: [phone]
www.midmark.com
General Information
© Midmark Corporation 2009
Intended Use
This product is intended to control patient positioning
while providing better patient access by eliminating the
cord from the controller(s).
Authorized CE Representative
Countries in the EEC should direct all questions, inci-
dents, and complaints to Midmark’s authorized
CE Representative listed below:
Midmark Europe SAS
22, Rue de St. Denis
53500 Ernee,
FRANCE
Phone: [phone]
Fax: [phone]
Calling for Service
If service is required, contact your Midmark dealer.
To contact Midmark directly:
1-800-MIDMARK (1-800-643-6275)
Monday-Friday 8:00 am until 5:00 pm (EST)
www.midmark.com
003-1945-00 Rev. B
Limited WarrantyCompliance Information
SCOPE OF WARRANTY
Midmark Corporation (“Midmark”) warrants to the original
purchaser its new Alternate Care products and components
(except for components not warranted under “Exclusions”)
manufactured by Midmark to be free from defects in material and
workmanship under normal use and service. Midmark’s
obligation under this warranty is limited to the repair or replace-
ment, at Midmark’s option, of the parts or the products the defects
of which are reported to Midmark within the applicable
warranty period and which, upon examination by Midmark, prove
to be defective.
APPLICABLE WARRANTY PERIOD
The applicable warranty period, measured from the date of
delivery to the original user, shall be one (1) year for all warranted
products and components.
EXCLUSIONS
This warranty does not cover and Midmark shall not be liable for
the following: (1) repairs and replacements because of misuse,
abuse, negligence, alteration, accident, freight damage, or
tampering; (2) products which are not installed, used, and proper-
ly cleaned as required in the Midmark “Installation” and or “Instal-
lation / Operation Manual” for this applicable product. (3) products
considered to be of a consumable nature; (4) accessories or
parts not manufactured by Midmark; (5) charges by anyone for
adjustments, repairs, replacement parts, installation, or other work
performed upon or in connection with such products which is not
expressly authorized in writing in advance by Midmark.
EXCLUSIVE REMEDY
Midmark’s only obligation under this warranty is the repair or
replacement of defective parts. Midmark shall not be liable for any
direct, special, indirect, incidental, exemplary, or consequential
damages or delay, including, but not limited to, damages for loss
of prots or loss of use.
NO AUTHORIZATION
No person or rm is authorized to create for Midmark any other
obligation or liability in connection with the products.
THIS WARRANTY IS MIDMARK’S ONLY WARRANTY AND
IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR
IMPLIED. MIDMARK MAKES NO IMPLIED WARRANTIES OF
ANY KIND INCLUDING ANY WARRANTIES OF MERCHANT-
ABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE,
THIS WARRANTY IS LIMITED TO THE REPAIR OR
REPLACEMENT OF DEFECTIVE PARTS.
FCC Compliance Statement
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial
environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual,
may cause harmful interference to radio communica-
tions. Operation of this equipment in a residential area
is likely to cause harmful interference in which case
the user will be required to correct the interference at
their own expense.
Any modications to this product may violate the rules
of the Federal Communications Commission and
make operation of the product unlawful.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
recieved, including interference that may cause
undesired operation.
Declaration of Conformity
Midmark Corporation declares that
9A429001 thru 9A429005 conform to the
applicable requirements of the Radio
Equipment & Telecommunications
Equipment Directive 1999/5/EC, Annex II
Serial Number: ALL
Date: 10/13/2011
Quality Assurance Manager
Don Carr
Midmark Corporation
60 Vista Drive
P.O. Box 286
Versailles, OH 45380
U.S.A. 077-0880-00