Installation Guide

Classic SL owner’s manual REV E 2056
13 |
P a g e 10- 0 0 1 - 3 R E V : E
Figure 6
Install
locknut here to act as a spacer.
CLASSIC SL does NOT have Ethernet or USB!
Wiring the Classic SL
WARNING: Shock hazard. Disconnect the batteries and input power before opening the
Classic front cover. ALWAYS use proper Over current devices and disconnects on the PV+ and Battery +
at the Classic (MidNite DC breakers work well for both).
WARNING to comply with Australian/New Zealand code:
Any connection to the Classic SL will require double/reinforced insulated wire.
The Battery circuits are not isolated from hazardous PV circuits so proper cover/barrier must be in place to
ensure user cannot access battery circuits without a tool.