Quick Start Guide

Just the Facts for the Classic (continued)
9 | P a g e 10- 2 0 9 - 1 R E V : D
Removing the instructions and battery insulator from the MNGP
Figure 6
There is a white paper instruction sheet behind the window in the MNGP as shown in Figure 6 above. This needs to
be removed. There is also a paper insulator behind the small coin battery that needs to be removed for the Clock and
non-volatile memory to store its data when the Classic is powered down.
First, turn the DC input and output breaker “off” to de energize the Classic. You will need to gently pull the front
cover off the MNGP. With the cover removed you can slide the paper out from behind the battery. You may want to
use your finger nail to hold the battery in while doing this so it does not fall out. You will need to plug the speaker
wire in as seen below. (It is not polarity sensitive) When re-installing the cover take care to get all the rubber
buttons through their holes in the face of the MNGP.