User Manual

Classic owner’s manual Rev H 2056
18 | P a g e 1 0 - 0 0 1 - 1 R E V : H
Addressing the Classics
You can assign unique addresses to each networked Classic. This is not necessary for Follow Me to work
but it is necessary if you want to view multiple Classics from a single MNGP. To address a Classic simply
use the MNGP that is plugged into that Classic, or plug the MNGP into that classic and hold the Left
arrow button down and tap the up or down button. The normal default address is 10 so going up will take
you to 11 and down to 9. When you get to the unused address you want for that Classic hold the left and
right arrows for a second until “Data Sent and Saved” shows up. Now this Classic has been re addressed
to the new address. Do this for all the Classics on the network.
To view other Classics on the network use the same button strokes. Hold the left arrow down and tap the
up or down arrow depending on which number you are looking for. We suggest going from 10 up for
clarity. So if you had four Classics they would be 10,11,12 and 13. You would scroll up from the normal
position to find the other three.
Figure 10Follow-Me diagram
When installing the Follow Me cables for the last time it is recommended you add a bit of the included
silicone grease on the metal contacts of the male ends of all the cables.