MN1000FUSE Specifications

ManualsBrandsMidNite Solar ManualsWind and Solar EnergyMidNite Solar 1000 Volt DC Fuses

EP.MERSEN.COM

SP 41

or correct, without notice, any information contained in this datasheet.

RATINGS:

• Volts: 1000VDC

• Amps: 1 to 32A

• IR: 50kA I.R. DC

• MBC: 1.35 x In

• Photovoltaic Fuse, gPV

FEATURES/BENEFITS:

• Low fault current interrupting

capability

• Durable construction for

enhanced system longevity

• Temperature cycle withstand

capability

• Guaranteed operation at

temperature extremes

• Industry’s ﬁrst UL Listed Solution

• Globally accepted

APPLICATIONS:

• All photovoltaic applications

• PV string/array level protection

• Combiner box applications

• In-line PV module protection

• Inverters

• Battery charge controllers

APPROVALS:

• UL Listed to Standard UL2579 File

E333668

• CSA Component Certiﬁed C22.2

• IEC 60269-6 Approved

Mersen’s HP10M photovoltaic (PV) fuse series was developed

speciﬁcally for the protection of PV string wiring for 1000VDC

industrial rooftop and utility scale photovoltaic systems. Its robust

construction makes it ideal for continuous temperature and current

cycling withstand adding to system longevity. The 1000VDC rated

HP10M, designed for low minimum breaking capacity capabilities

of 1.35 times the fuse rated current value, allows for safe circuit

interruption under typical low fault current conditions produced by PV

arrays. In addition to the standard ferrule terminal, parts are available

with Crimp Cap terminals for in-line fuse applications. The unique wire

crimp terminal (CC option) permits solderless wire-to-fuse connection

for overmold encapsulation of fuse and wiring. Protect your o-grid

or grid tied PV system from unexpected string faults using Mersen’s

HelioProtection® fuse line.

CATALOG NUMBERS - FUSE HOLDER

UltraSafe™ Non-Indicating UltraSafe™ Indicating

Screw Type USM1HEL USM1IHEL

Spring Type USGM1HEL USGM1IHEL

For additional information, view catalog page for USCC & USM UltraSafe

Fuse holders.

HP10M

1000V DC Midget (10x38mm) Photovoltaic Fuses

SPECIAL PURPOSE

FOR STRING PROTECTION

Summary of content (2 pages)

PAGE 1
HP10M 1000V DC Midget (10x38mm) Photovoltaic Fuses SPECIAL PURPOSE FOR STRING PROTECTION R AT I N G S : • Volts: 1000VDC • Amps: 1 to 32A • IR: 50kA I.R. DC • MBC: 1.35 x In • Photovoltaic Fuse, gPV S P F E AT U R E S / B E N E F I T S : Mersen’s HP10M photovoltaic (PV) fuse series was developed specifically for the protection of PV string wiring for 1000VDC industrial rooftop and utility scale photovoltaic systems.
PAGE 2
HP10M SPECIAL PURPOSE 1000V DC Midget (10x38mm) Photovoltaic Fuses C ATA L O G N U M B E R S A N D E L E C T R I C A L C H A R A C T E R I S T I C S S P Voltage (VDC) Amperage (A) Catalog Number Reference Number Watts Loss @ 70% x In (W) Watts Loss @ 80% x In (W) Watts Loss @ 100% x In (W) 1000 1 2 3 3.5 4 5 6 7 8 10 12 15 20 25 30 32 1 2 3 3.