Turbine Matrix for the Clipper

ManualsBrandsMidNite Solar ManualsSolar & Wind Power1,500 Watt AC Turbine Clipper 2.0 Ohms

PLEASE DO NOT CONSIDER THIS LIST A GUARANTEE. PLEASE CALL RYAN OR ROY

TO VERIFY YOUR PARTICULAR NEEDS BEFORE ORDERING AS EACH SYSTEM IS DIFFERENT

Turbine Make and model Stator Bat Clipper Classic Clipper Model Pwr curve Notes

Voltage required model in Classic

Bergey XL1 24v any NA NA NA NA Old DC model, To low of a voltage to MPPT

Bergey XL1 24MS 12v No 250 No will current limit and be noisy see next line

Bergey XL1 24MS 12v Yes 150 MNCLIPAC1.5K2.0 No

Bergey XL1 24MS 24v No 250 No will current limit and be noisy see next line

Bergey XL1 24MS 24v Yes 150 MNCLIPAC1.5K2.0 No

Bergey XL1 24MS 48v NA NA NA NA to low on voltage

Bergey XL1 48MS 12v no 250 No will current limit and be noisy see next line

Bergey XL1 48MS 12v yes 150 MNCLIPAC1.5K2.0 No

Bergey XL1 48MS 24v no 250 Yes will current limit and be noisy see next line

Bergey XL1 48MS 24v yes 250 MNCLIPAC1.5K2.0 Yes

Bergey XL1 48MS 48v no 250 Yes Will be noisy see next line

Bergey XL1 48MS 48v yes 250 MNCLIPAC1.5K2.0 Yes

Whisper 900 / H40 / Whisper 100 12v 12v yes 150 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 900 / H40 / Whisper 100 24v 12v yes 150 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 900 / H40 / Whisper 100 24v 24v yes 150 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 900 / H40 / Whisper 100 36v 12v yes 150 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 900 / H40 / Whisper 100 36v 24v yes 200 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 900 / H40 / Whisper 100 36v 36v yes 200 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 900 / H40 / Whisper 100 48v 12v yes 150 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 900 / H40 / Whisper 100 48v 24v yes 200 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 900 / H40 / Whisper 100 48v 36v yes 200 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 900 / H40 / Whisper 100 48v 48v yes 200 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 900 / H40 / Whisper 100 HV 12v yes 250 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 900 / H40 / Whisper 100 HV 24v yes 250 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 900 / H40 / Whisper 100 HV 36v yes 250 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 900 / H40 / Whisper 100 HV 48v yes 250 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 1000 / H80 / Whisper 200 12v 12v yes 150 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 1000 / H80 / Whisper 200 24v 12v yes 150 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 1000 / H80 / Whisper 200 24v 24v yes 150 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 1000 / H80 / Whisper 200 36v 12v yes 150 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 1000 / H80 / Whisper 200 36v 24v yes 200 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 1000 / H80 / Whisper 200 36v 36v yes 200 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 1000 / H80 / Whisper 200 48v 12v yes 150 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 1000 / H80 / Whisper 200 48v 24v yes 200 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 1000 / H80 / Whisper 200 48v 36v yes 200 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 1000 / H80 / Whisper 200 48v 48v yes 200 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 1000 / H80 / Whisper 200 HV 12v yes 250 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 1000 / H80 / Whisper 200 HV 24v yes 250 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 1000 / H80 / Whisper 200 HV 36v yes 250 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 1000 / H80 / Whisper 200 HV 48v yes 250 MNCLIPAC1.5K2.0 No Whisper is not real easy but this should work

Whisper 3000 / Whisper 175 / Whisper 500 12v 12v yes 150 MNCLIP4KAC1.6 No Whisper is not real easy but this should work

Whisper 3000 / Whisper 175 / Whisper 500 24v 12v yes 150 MNCLIP4KAC1.6 No Whisper is not real easy but this should work

Whisper 3000 / Whisper 175 / Whisper 500 24v 24v yes 150 MNCLIP4KAC1.6 No Whisper is not real easy but this should work

Whisper 3000 / Whisper 175 / Whisper 500 36v 12v yes 150 MNCLIP4KAC1.6 No Whisper is not real easy but this should work

Whisper 3000 / Whisper 175 / Whisper 500 36v 24v yes 200 MNCLIP4KAC1.6 No Whisper is not real easy but this should work

Whisper 3000 / Whisper 175 / Whisper 500 36v 36v yes 200 MNCLIP4KAC1.6 No Whisper is not real easy but this should work

Whisper 3000 / Whisper 175 / Whisper 500 48v 12v yes 250 MNCLIP4KAC1.6 No Whisper is not real easy but this should work

Whisper 3000 / Whisper 175 / Whisper 500 48v 24v yes 250 MNCLIP4KAC1.6 No Whisper is not real easy but this should work

Whisper 3000 / Whisper 175 / Whisper 500 48v 36v yes 250 MNCLIP4KAC1.6 No Whisper is not real easy but this should work

Whisper 3000 / Whisper 175 / Whisper 500 HV 48v yes 250 MNCLIP4KAC1.6 No Whisper is not real easy but this should work

Whisper 3000 / Whisper 175 / Whisper 500 HV 12v yes 250 MNCLIP4KAC1.6 No Whisper is not real easy but this should work

Whisper 3000 / Whisper 175 / Whisper 500 HV 24v yes 250 MNCLIP4KAC1.6 No Whisper is not real easy but this should work

Whisper 3000 / Whisper 175 / Whisper 500 HV 36v yes 250 MNCLIP4KAC1.6 No Whisper is not real easy but this should work

Whisper 3000 / Whisper 175 / Whisper 500 HV 48v yes 250 MNCLIP4KAC1.6 No Whisper is not real easy but this should work

Kestrel e160i 12v 12v Probably 150 MNCLIP1.5KDC2.4 No DC no blade pitch

Kestrel e160i 24v 12v yes 200 MNCLIP1.5KDC2.4 No DC no blade pitch

Kestrel e160i 24v 24v yes 200 MNCLIP1.5KDC2.4 No Not a good match for MPPT

Kestrel e160i 36v 12v yes 200 MNCLIP1.5KDC2.4 No DC no blade pitch

Kestrel e160i 36v 24v yes 200 MNCLIP1.5KDC2.4 No DC no blade pitch

Kestrel e160i 36v 36v yes 200 MNCLIP1.5KDC2.4 No Not a good match for MPPT

Kestrel e160i 48v 12v yes 200 MNCLIP1.5KDC2.4 No DC no blade pitch

Kestrel e160i 48v 24v yes 200 MNCLIP1.5KDC2.4 No DC no blade pitch

Kestrel e160i 48v 36v yes 200 MNCLIP1.5KDC2.4 No DC no blade pitch

Kestrel e160i 48v 48v yes 200 MNCLIP1.5KDC2.4 No Not a good match for MPPT

Kestrel e160i 110v 12v yes 200 MNCLIP1.5KDC2.4 No DC no blade pitch

Kestrel e160i 110v 24v yes 200 MNCLIP1.5KDC2.4 No DC no blade pitch

Kestrel e160i 110v 36v yes 200 MNCLIP1.5KDC2.4 No DC no blade pitch

Kestrel e160i 110v 48v yes 200 MNCLIP1.5KDC2.4 No DC no blade pitch

Kestrel e160i 200v NA NA NA NA NA

Summary of content (2 pages)

PAGE 1
PLEASE DO NOT CONSIDER THIS LIST A GUARANTEE. PLEASE CALL RYAN OR ROY TO VERIFY YOUR PARTICULAR NEEDS BEFORE ORDERING AS EACH SYSTEM IS DIFFERENT Turbine Make and model Stator 24v Bat Voltage any Clipper Classic required model NA NA Bergey XL1 Clipper Model Bergey XL1 Bergey XL1 Bergey XL1 Bergey XL1 Bergey XL1 24MS 24MS 24MS 24MS 24MS 12v 12v 24v 24v 48v No Yes No Yes NA 250 150 MNCLIPAC1.5K2.0 250 150 MNCLIPAC1.5K2.
PAGE 2
Kestrel e230i Kestrel e230i Kestrel e230i Kestrel e230i Kestrel e230i Kestrel e230i Kestrel e230i Kestrel e230i Kestrel e230i Kestrel e230i Kestrel e230i Kestrel e230i Kestrel e230i Kestrel e230i Kestrel e230i 12v 24v 24v 36v 36v 36v 48v 48v 48v 48v 110v 110v 110v 110v 200v 12v 12v 24v 12v 24v 36v 12v 24v 36v 48v 12v 24v 36v 48v NA NO NO NO NO NO NO NO NO NO NO Yes Yes Yes Yes NA Kestrel e300i Kestrel e300i Kestrel e300i Kestrel e300i Kestrel e300i Kestrel e300i Kestrel e300i Kestrel e300i Kestrel e300i