Conext SW Manual

22 | Page
MNECSW E-Panel Instructions
1 0-262-1 REV E
AC Wiring
Danger!
Potentially dangerous voltages may be present. Ensure that all sources of power are disconnected.
Des tensions potentiellement dangereuses peuvent être présentes. Veiller à ce que toutes les sources
d'alimentation sont débranchés.
L1 IN
L2 IN
L1 OUT
L2 OUT
GROUND
NEUTRAL
Important!
Neutral and ground must be tied together and at only one place. This is normally at the service
entrance. For an off grid system this can be done in the E-Panel. Local inspectors may want this
bond to be at another location such as a distribution panel. This will work just as well.
These breaker locations may be
used for AC or DC distribution or
both if proper isolation is provided.
Refer to the wiring diagrams for
typical applications.
Breakers sold separately.