Outback Plus E-Panel

Been mooned lately?
17722 - 67th Ave NE, Unit C, Arlington WA 98223 - Ph 425.374.9060 Fax [phone]
www.midnitesolar.com
MIDNITE S OLAR
120 VAC OUTBACK
E-Panel
The 120 VAC OUTBACK PLUS E-PANEL was designed to provide the additional components necessary to create a
code compliant system. This combination is now the standard off-grid and battery backup grid tie system offered by
many North American professional Solar installers.
PHOTO
Over-current disconnects are an essential part of every RE system.
Renewable energy circuit breakers are not normally stocked at your
average electrical supply company. These breakers are custom
manufactured to ensure systems have the proper protection for the
many different AC & DC circuits involved. The Midnite E-Panel
integrates high voltage PV input, charge controller outputs, inverter
over current protection, DC load circuits, AC input disconnect, AC
input/output bypass, AC load circuits, DC-GFP circuit, wind turbine
input circuit and hydro input circuits. Traditional electrical supply
companies do not stock this type of product, nor the components
required to assemble an RE system.
* COMPACT: Smaller size takes up
less wall space
* MORE SLOTS: Six din rail and
three panel mount breaker slots for
PV, Wind, Hydro and AC or DC
distribution.
* HARDWARE: Hardware included
for inverter, charge controller,
wall mounting brackets, remotes
gfci’s, DC-GFP’s etc.
* AGENCY APPROVALS: ETL listed
to US and Canadian standards
and NEC compliance eases
Electrical inspector concerns
* INVERTER: Inverter battery breaker
and inverter cables included
* PREWIRED: AC input/output and
bypass assembly pre-wired.
Battery Plus bus pre-wired. AC,
DC, and PV bus bars installed