Magnum E-Panel

Been mooned lately?
17722 - 67th Ave NE, Unit C, Arlington WA 98223 - Ph 360.403.7207 Fax [phone]
www.midnitesolar.com
MIDNITE S OLAR
The 120 VAC MAGNUM E-PANEL was designed to provide the additional components necessary to create a code
compliant system. This combination is now the standard off-grid system offered by many North American professional
Solar installers. Our E-Panels are a compact, affordable and professional panel for mounting
a single inverter.
120 VAC MAGNUM
E-Panel
PHOTO
Over-current disconnects are an essential part of every RE system.
Renewable energy circuit breakers are not normally stocked at your
average electrical supply company. These breakers are custom
manufactured to insure systems have the proper protection for the
many different AC & DC circuits involved. The Midnite E-Panel
integrates high voltage PV input, charge controller outputs, inverter
over current protection, DC load circuits, AC input disconnect, AC
input/output bypass, AC load circuits, DC-GFP circuit, wind turbine
input circuit and hydro input circuits. Traditional electrical supply
companies do not stock this type of product.
* COMPACT: Smaller size takes up
less wall space
* MORE SLOTS: Six din rail and
three panel mount breaker slots for
PV, Wind, Hydro and AC or DC
distribution.
* HARDWARE: Hardware included
for inverter, charge controller,
wall mounting brackets, remotes
GFCI’s, DC-GFP’s etc.
* AGENCY APPROVALS: ETL listed
to US and Canadian standards
and NEC compliance eases
Electrical inspector concerns
* INVERTER: Inverter battery breaker
and inverter cables included
* PREWIRED: AC input output and
bypass assembly pre-wired.
Battery Plus bus pre-wired. AC,
DC, and PV bus bars installed