Magnum (MS4448 120/240VAC) MNE240 SeriesOwner's Manual

8 | P a g e 1 0 - 0 2 9 - 1 R E V : B
MNE-240 E-PANEL INSTRUCTIONS
3.3 Knockout sizes and Dimensions
The dimensioned chassis drawing in figure 3 shows the location of the conduit knockouts, mounting
holes and mounting brackets.
• Knockouts on the top surface are directly in line with ones on the bottom surface for stacking
units vertically.
TOP VIEW
UPPER CONDUIT
KNOCKOUTS ARE
MIRROR IMAGE OF
BOTTOM KNOCKOUTS
4.67"
12.90"
22.37"
0.75 "
17.00"
4.17"
INSIDE 1.13" (3/4 CONDUIT )
INSIDE 1.38" (1" CONDUIT )
24 . 91"
26.45"
INSIDE 0.87" (1/2” CONDUIT )
INSIDE 2.47" (2" CONDUIT )
25 . 55"
0.87" (1/2” CONDUIT)
2.47" ( 2" CONDUIT)
1.13" ( 3/4 CONDUIT)
1.38" ( 1" CONDUIT)
1.00"
14.41"
18.50"
0.87" (1/2” CONDUIT)
2.47" ( 2" CONDUIT)
1.13" ( 3/4 CONDUIT)
1.38" ( 1" CONDUIT)
LEFT SIDE VIEW
RIGHT SIDE VIEW
1.13"
(3/4 CONDUIT)
1.13" ( 3/4 CONDUIT)
1.38" (1" CONDUIT)
1.75" 1 1/4” CONDUIT)
0.50"
0.87" ( 1/2” CONDUIT )
2.47" ( 2" CONDUIT)
BOTTOM VIEW
Figure 3, MNE-240 Series E-Panel Dimensions and Knockout Sizes