Installation Guide
35 | Page
1 0-268-1 REV P7
The KID Solar Charge Controller Instructions
Load Functions / Setup
-FUNC: Manual - ON/OFF -
This Mode can be turned On or Off by the user Manually, and the Load
circuit will act accordingly, this Mode can be Used with the Low Battery Disconnect safety monitoring.
To use Manual Mode:
• From the Status Menu: Press Menu Back
• Scroll to the Right and select Load and Press Enter
• Select FUNC: Manual
• Press the Right button to *ON - The load will turn on and stay on until turned off.
• Press the Save Button
• Press SETUP button to Bring up LBD setup (see
LBD L
ow
B
attery
D
isconnect for more details).
-FUNC: Dusk + Hrs - OFF/AUTO -
This Function will become active when night comes and it will stay
On for the number of hrs set up by the user, then the load will turn Off.
To use Dusk + Hrs:
• From the Status Menu: Press Menu Back
• Scroll to the Right and select Load and Press Enter
• Select FUNC: Dusk + Hrs
• Press the Right button to *AUTO - The load will turn on and off as set by the user.
• Press the Save Button
• Press SETUP button adjust the amount of Hrs to stay on.
• Press the Save Button
-FUNC: Night Light – OFF/AUTO –
This function will turn on the load when night comes and it will turn
it off when the sun comes up, this Mode can be Used with the Low Battery Disconnect safety
monitoring.
To use Night Light Mode:
• From the Status Menu: Press Menu Back
• Scroll to the Right and select Load and Press Enter
• Select FUNC: Night Light
• Press the Right button to *Auto
• Press the Save Button
• Press SETUP button to Bring up LBD setup (see LBD section for more details).
-FUNC: Day Light – OFF/AUTO –
This function will turn on the load when the sun comes up and it will
turn off when the sun goes down, this Mode can be Used with the Low Battery Disconnect safety
monitoring.
To use Day Light Mode:
• From the Status Menu: Press Menu Back
• Scroll to the Right and select Load and Press Enter
• Select FUNC: Day Light
• Press the Right button to *Auto
• Press the Save Button
• Press SETUP button to Bring up LBD setup (see LBD section for more details).